User manual Hotpoint Washer BHWM 149

If you found this page, you probably have a problem and you need a user manual for the device Hotpoint Washer BHWM 149. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Hotpoint Washer BHWM 149 it belongs to the category Washer. A user manualHotpoint Washer BHWM 149 is taken from the manufacturer, a Hotpoint company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Hotpoint Washer BHWM 149 directly. You can view the user manualHotpoint Washer BHWM 149 directly online or save and store it on your computer.

Instructions for the fitter  
Door Mounting Accessories (Fig. 1-2-3-4-5).  
GB  
Mounting the wooden panel onto the  
door and inserting the machine into  
cabinets:  
In the case where the machine must be  
shipped for final installation after the wooden  
panel has been mounted, we suggest leaving  
it in its original packaging. The packaging  
was designed to make it possible to mount  
the wooden panel onto the machine without  
removing it completely (see figures below).  
The wooden panel that covers the face of  
the machine must not be less than 18 mm  
in thickness and can be hinged on either the  
right or left. For the sake of practicality when  
using the machine, we recommend that the  
panel be hinged on the same side as the  
door for the machine itself - the left.  
N° 2 Hinge Supports  
N° 2 Hinges  
Fig. 1  
Fig. 2  
N° 1 Magnet  
N° 1 Magnet plate  
Fig. 3  
Fig. 4  
N° 1 Rubber plug  
Fig. 5  
N° 4 Spacers  
A
B
Fig. 4/B  
-
-
No. 6 type A self-threading screws, l =13 mm.  
No. 2 type B metric, countersunk screws,  
l =25; for fastening the magnet plate to the  
cabinet.  
-
No. 4 type C metric screws, l =15 mm; for  
mounting the hinge supports to the cabinet.  
-
No. 4 type D metric screws, l =7 mm; for  
mounting the hinges on the supports.  
Mounting the Parts onto the Face of the  
Machine.  
C
D
-
Fit the hinge supports to the appliance front  
panel, positioning the hole marked with an  
arrow in fig. 1 so that it is on the inner side of  
the front panel. Fit a spacer (fig. 4/B) betwe-  
en the surfaces using type C screws.  
-
Fit the magnet plate at the top of the op-  
posite side, using type B screws to fix two  
spacers (fig. 4/B) between the plate and the  
surface.  
Tur seite  
E
6

In addition to the user manual Hotpoint Washer BHWM 149, we also provide a support panel to help you solve your problems with Hotpoint Washer BHWM 149. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Hotpoint Washer BHWM 149. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Hotpoint Washer BHWM 149 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.