User manual Valor Auto Companion Inc. Valor Legend Ultra 837 AN

If you found this page, you probably have a problem and you need a user manual for the device Valor Auto Companion Inc. Valor Legend Ultra 837 AN. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Valor Auto Companion Inc. Valor Legend Ultra 837 AN it belongs to the category Outdoor Fireplace. A user manualValor Auto Companion Inc. Valor Legend Ultra 837 AN is taken from the manufacturer, a Valor Auto Companion Inc. company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Valor Auto Companion Inc. Valor Legend Ultra 837 AN directly. You can view the user manualValor Auto Companion Inc. Valor Legend Ultra 837 AN directly online or save and store it on your computer.

Safety Upgrade Instructions  
2
. Removal of bushing from ignition bar  
For models fitted with a locating bracket (See figure 5)  
1
. Remove the self-tapping screw from the  
ignition bar locating bracket (See figure 5).  
. Place a suitable flat instrument on the  
underside of the bushing and lift the bushing  
clear of the mounting bracket (see figure 6).  
. Pull the ignition bar forward and clear of the  
mounting bracket.  
2
3
4
. Remove bushing from ignition bar by sliding  
up around bend and off bar. If bushing is too  
tight to slide off, cut off bushing with a utility  
knife.  
5
6
. With the bushing removed, push the ignition  
bar back into the mounting bracket.  
Figure 5. Removal of Screw from  
locating bracket.  
. Replace the locating bracket and secure using  
the self-tapping screw removed previously.  
For models NOT fitted with a locating bracket  
(See figure 5)  
7
. Place a suitable flat instrument on the  
underside of the bushing and lift the bushing  
clear of the mounting bracket (see figure 6).  
. Pull the ignition bar forward and clear of the  
mounting bracket.  
8
9
. Remove bushing from ignition bar by sliding  
up around bend and off bar. If bushing is too  
tight to slide off, cut off bushing with a  
utility knife.  
Figure 6. Removal of Bushing.  
1
1
0. With the bushing removed, push the ignition  
bar back into the mounting bracket.  
1. Position the locating bracket with its sides in  
line with those of the mounting bracket (See  
figure 7). Mark the position of the hole.  
2. Remove the bracket and drill a 3.5mm (1/8  
in) hole  
1
1
and secure using a self-tapping screw.  
3. Reposition the location bracket  
Figure 7. Fitting the locating  
bracket.  
Page 3  

In addition to the user manual Valor Auto Companion Inc. Valor Legend Ultra 837 AN, we also provide a support panel to help you solve your problems with Valor Auto Companion Inc. Valor Legend Ultra 837 AN. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Valor Auto Companion Inc. Valor Legend Ultra 837 AN. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Valor Auto Companion Inc. Valor Legend Ultra 837 AN - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.