User manual Philips 240S1

If you found this page, you probably have a problem and you need a user manual for the device Philips 240S1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips 240S1 it belongs to the category Computer Monitor. A user manualPhilips 240S1 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips 240S1 directly. You can view the user manualPhilips 240S1 directly online or save and store it on your computer.

Troubleshooting  
Check that the signal cable is properly securely connected to  
the graphics board or PC.  
Image vibrates on the screen  
Vertical flicker appears  
Press the Auto button.  
Eliminate the vertical bars using the Phase/Clock of Setup in  
OSD Main Controls.  
Horizontal flicker appears  
Press the Auto button.  
Eliminate the vertical bars using the Phase/Clock of Setup in  
OSD Main Controls.  
image appears blurred, indistinct or too  
dark  
Adjust the contrast and brightness on On-Screen Display.  
Uninterrupted display of still or static images over an  
extended period may cause " burn in", also known as "after-  
imaging " or "ghost imaging", on your screen. "Burn-in", "after-  
imaging", or "ghost imaging" is a well-known phenomenon in  
LCD panel technology. In most cases, the "burned in" or  
An "after-image", "burn-in" or "ghost  
image" remains after the power has  
been turned off.  
"
after-imaging" or "ghost imaging" will disappear gradually  
over a period of time after the power has been switched off.  
Always activate a moving screen saver program when you  
leave your monitor unattended.  
Always activate a periodic screen refresh application if your  
LCD monitor will display unchanging static content.  
Set the PCs display resolution to the same mode as  
monitors recommended screen native resolution.  
Image appears distorted. Text is fuzzy  
or blurred.  
The remaining dots are normal characteristic of the liquid  
crystal used in todays technology, Pls refer the pixel policy for  
more detail.  
Green, red, blue, dark, and white dots  
appears on the screen  
file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/240S1-240S1-plus/240...5B.0V701.001/CD-Contents/lcd/manual/ENGLISH/240S1/safety/saf_troub.htm 第 2 頁 / 共 3 [98-06-05 10:43]  

In addition to the user manual Philips 240S1, we also provide a support panel to help you solve your problems with Philips 240S1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips 240S1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips 240S1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.