User manual Sony EXPODISC A300

If you found this page, you probably have a problem and you need a user manual for the device Sony EXPODISC A300. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Sony EXPODISC A300 it belongs to the category Digital Camera. A user manualSony EXPODISC A300 is taken from the manufacturer, a Sony company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Sony EXPODISC A300 directly. You can view the user manualSony EXPODISC A300 directly online or save and store it on your computer.

ExpoDisc Custom White Balance Procedures  
Sony Cameras  
Sony A100  
1
2
. Install the ExpoDisc and set the camera to Manual Focus mode.  
. Allow the camera to set an automatic exposure using the “P”, “S” or “A”  
modes or set the correct manual exposure in “M” mode.  
3
4
. Rotate the function dial on the top-left of the camera to the WB position.  
. Press the Fn button in the center of the function dial to display the White-  
Balance mode screen.  
5. Using the controller pad to the right of the screen, move up or down to select  
the custom white balance icon ( ) and press on the controller pad.  
6. Select  
(set) by pressing on the controller. Press the center button on  
the controller. “Use spot metering area. Press shutter to calibrate.” will  
appear on the screen.  
7
. Aim the camera in the appropriate direction for the given lighting condition  
and press the shutter release button. See the ExpoDisc Instruction Manual for  
more information on where to aim the camera. The screen will display color  
temperature values.  
8
9
. Press the center button on the controller to store the white balance recorded.  
. Remove the ExpoDisc, place camera in desired shooting mode and start  
shooting.  
Sony A200/A300/A350  
1
2
. Install the ExpoDisc and set the camera to Manual Focus mode.  
. Allow the camera to set an automatic exposure using the “P”, “S” or “A”  
modes or set the correct manual exposure in “M” mode.  
. Press the Fn button to select the White Balance icon ( ).  
. Select ( SET) with the / on the controller.  
3
4
5
. Aim the camera in the appropriate direction for the given lighting condition  
and press the shutter release button. See the ExpoDisc Instruction Manual for  
more information on where to aim the camera.  
6
. Press the center of the controller. The monitor returns to the recording  
information display with the memorized custom white balance setting  
retained. This white balance setting will stay in effect until a new custom  
white balance is registered.  
7
. If you get the message “Custom WB error” this indicates that you need to  
adjust your exposure and reattempt to set your white balance.  
. Remove the ExpoDisc, return the camera to auto focus if desired and start  
shooting.  
8
Copyright, 2010 ExpoImaging, Inc.  
“Sony” and the Sony camera models listed are trademarks of Sony, Inc.  

In addition to the user manual Sony EXPODISC A300, we also provide a support panel to help you solve your problems with Sony EXPODISC A300. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Sony EXPODISC A300. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Sony EXPODISC A300 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.