CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in a minor or moderate injury.
07 System chart
008 Identiﬁcation of features
åLeaking, overheating, or damaged battery could result in ﬁre or injury.
Front & Top
Use battery with the correct speciﬁcation for the camera.
Do not short circuit, heat or dispose of battery in ﬁre.
Do not insert the battery with the polarities reversed.
Bottom / 5 Function button
Camera Status Lamp
åRemove the battery when not planning to use the camera for a
long period of time. Otherwise the battery may leak corrosive
electrolyte and permanently damage the camera’s components.
åDo not ﬁre the ﬂash while it is in contact with hands or objects. Do
not touch the ﬂash after using it continuously. It may cause burns.
åDo not move the camera while it is switched on, if you are using
the AC adapter. After use, always switch off the camera before
unplugging the cable from the wall socket. Then make sure that
any connector cords or cables to other devices are disconnected
before moving the camera. Failure to do so may damage the
cords or cables and cause a ﬁre or electric shock.
åTake care not to touch the lens or lens cover to avoid taking an
unclear image and possibly causing camera malfunction.
åAvoid obstructing the lens or the ﬂash when you capture an image.
åCredit cards may be demagnetized if left near case. Avoid leaving
magnetic strip cards near the case.
11 Connecting to a Power Source
12 Inserting the memory card
13 Instructions on how to use the memory card
RECORDING 015 LCD monitor indicator
16 Starting the recording mode
How to use the Auto mode
How to use the Program mode
How to use the Manual mode
How to use the DIS mode
åUsing an AC adapter that doesn’t match with the camera speciﬁcation
may cause camera malfunction. We recommend supplied battery or
exclusive rechargeable battery.
Using the Photo Help Guide mode
How to use the Portrait mode
How to use the Scene modes
How to use the Movie clip mode
Recording the movie clip without sound
Pausing while recording a movie clip
ÄAvailable AC adapter :
Voltage: 3.3V, Ampere: 2.0A, Diameter:
åAfter turning on the camera, Check whether the battery type and
the camera setting set on the [Settings] > [Battery Type] menu
(p. 49) are same.