User manual Better Light 7

If you found this page, you probably have a problem and you need a user manual for the device Better Light 7. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Better Light 7 it belongs to the category Digital Camera. A user manualBetter Light 7 is taken from the manufacturer, a Better Light company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Better Light 7 directly. You can view the user manualBetter Light 7 directly online or save and store it on your computer.

Quick Start Guide  
1. Connect the camera insert to the control unit  
Plug the male end of the insert connector into  
the DB-25 socket on the camera control unit into  
the (marked as “DB-25 Insert Connector” in the  
connector identification image on page 8). Make  
sure the plug is firmly seated in the socket before  
securing it to the connector with the two connector  
Connect or disconnect this cable ONLY when  
the camera power is turned OFF.  
Mate the female end of the cable with the DB-  
25 plug on the insert, again making sure the connectors are firmly seated before tightening the secur-  
ing screws. Do not allow this cable to run alongside “noisy” cables such as computer, HMI lamp  
cabling or electric power cords, or the image data may be compromised.  
NEVER connect anything except the insert to the DB-25 connector on the control unit.  
Do not use cable extenders to create a longer cable, as power losses and data corruption  
will occur. In addition to the 5 meter (15 feet) cable supplied with the camera, an 8 meter  
25 feet) cable is available from Better Light.  
We recommend that you secure the cables to the control unit (with straps, velcro, tape,  
etc.) to avoid accidental falls which could destroy the hard drive.  
2. Connect the control unit to the host computer  
Te camera control unit has a single USB-2 con-  
nector, which should be connected to your comput-  
er’s USB 2 port.  
Although the USB controller will work with  
USB 1.1 ports, with all software functions avail-  
able, prescan speeds will be limited and file  
retrievals will be very slow. USB 2 is the pre-  
ferred connection method.  

In addition to the user manual Better Light 7, we also provide a support panel to help you solve your problems with Better Light 7. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Better Light 7. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Better Light 7 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.