User manual 3D Connexion Cisco Wireless Router OL-6415-03

If you found this page, you probably have a problem and you need a user manual for the device 3D Connexion Cisco Wireless Router OL-6415-03. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database 3D Connexion Cisco Wireless Router OL-6415-03 it belongs to the category Dishwasher. A user manual3D Connexion Cisco Wireless Router OL-6415-03 is taken from the manufacturer, a 3D Connexion company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device 3D Connexion Cisco Wireless Router OL-6415-03 directly. You can view the user manual3D Connexion Cisco Wireless Router OL-6415-03 directly online or save and store it on your computer.

C H A P T E R  
7
Configuring QoS on an Access Point  
This chapter describes how to configure quality of service (QoS) on an access point. QoS provides  
preferential treatment to certain traffic at the expense of other traffic. Without QoS, the access point  
offers best-effort service to each packet, regardless of the packet contents or size. It sends the packets  
without any assurance of reliability, delay bounds, or throughput.  
Recommended Reading  
The following information is recommended for gaining a better understanding of QoS as it applies to  
voice deployments in a wireless environment:  
Wireless Quality-of-Service Deployment Guide  
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008014449  
.html  
Cisco Wireless IP Phone 7920 Design and Deployment Guide  
http://www.cisco.com/en/US/products/hw/phones/ps379/products_implementation_design_guide_boo  
k09186a00802a029a.html  
Understanding QoS for Wireless LANs  
Typically, networks operate on a best-effort delivery basis that means that all traffic has equal priority  
and an equal chance of being delivered in a timely manner. When congestion occurs, all traffic has an  
equal chance of being dropped.  
When QoS is configured on an access point, you can select specific network traffic, prioritize it, and use  
congestion-management and congestion-avoidance techniques to provide preferential treatment.  
Implementing QoS in a wireless LAN makes network performance more predictable and bandwidth  
utilization more effective.  
Configuring QoS creates and applies policies to the VLANs configured on the access point. If VLANs  
are not used on the network, QoS policies can be applied to the Ethernet and radio ports.  
QoS for Wireless LANs Versus QoS on Wired LANs  
The QoS implementation for wireless LANs differs from QoS implementations on other Cisco devices.  
With QoS enabled, access points perform the following:  
Does not classify packets; it prioritizes packets based on Differentiated Services Code Point (DSCP)  
value, client type (such as a wireless phone), or the priority value in the 802.1q or 802.1p tag.  
Cisco Wireless Router and HWICConfiguration Guide  
OL-6415-03  
7-1  

In addition to the user manual 3D Connexion Cisco Wireless Router OL-6415-03, we also provide a support panel to help you solve your problems with 3D Connexion Cisco Wireless Router OL-6415-03. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with 3D Connexion Cisco Wireless Router OL-6415-03. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with 3D Connexion Cisco Wireless Router OL-6415-03 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.