User manual Philips DVD702AT

If you found this page, you probably have a problem and you need a user manual for the device Philips DVD702AT. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips DVD702AT it belongs to the category DVD Player. A user manualPhilips DVD702AT is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips DVD702AT directly. You can view the user manualPhilips DVD702AT directly online or save and store it on your computer.

Preparation  
Gener al N ot es  
S-Video (Y/C) connection  
1
2
Connect the S-VIDEO OUT jack on the DVD Player to the  
S-Video in jack on the TVusing an optional S-Video cable  
(Y).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
Depending on yourTVand other equipment you wish to  
connect,there are various ways you could connect the  
player.Use only one of the connections described below.  
Please refer to the manuals of yourTV,VCR,Stereo System  
or other devices as necessary to make the best  
connections.  
For better sound reproduction,connect the players audio  
out jacks to the audio in jacks of your amplifier,receiver,  
stereo or audio/video equipment.SeeConnecting to  
optional equipment.’  
(
A) using the supplied audio cables.  
Video (CVBS) connection  
1
2
Connect the VIDEO OUT jack on the DVD Player to the  
video in jack on the TVusing the video cable supplied (X).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
Caution:  
Make sure the DVD Player is connected  
directly to the TV. Set the TV to the correct video  
input channel.  
(
A) using the supplied audio cables.  
Do not connect the DVD Players audio out  
jack to the phono in jack of your audio system .  
Do not connect your DVD Player via your  
TV  
VCR.The DVD im age could be distorted by the  
copy protection system .  
Connect ing t o a TV  
Make one of the following connections,depending on the  
capabilities of your existing equipment.  
When using the COMPONENTVIDEO OUT jacks,set the  
VIDEO OUTPUT switch to COMPONENT.When using  
the S-VIDEO OUT jack,set the VIDEO OUTPUT switch to  
S-VIDEO.  
Y
Z
A
X
Com ponent Video ( Y PR/CR PB/CB)  
connection  
1
2
Connect the PB/CB PR/CR YCOMPONENTVIDEO OUT  
jacks on the DVD Player to the corresponding in jacks on  
the TVusing an optional PR/CR PB/CB Ycable (Z).  
Connect the Left and Right AUDIO OUT jacks (1 or 2) of  
the DVD Player to the audio left/right in jacks on the TV  
(
A) using the supplied audio cables.  
PREPARAT IO N  
11  

In addition to the user manual Philips DVD702AT, we also provide a support panel to help you solve your problems with Philips DVD702AT. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips DVD702AT. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips DVD702AT - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.