139 246 12251
There are many ways to connect your new DVD/SACD Player to yourTelevision and other equipment.This
Quick Use Guide shows the easiest, most common connection between the Player and aTV.
Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or
picture if yourTV and/or audio system is compatible.
DIGITAL AUDIO OUT
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
Connect the yellowVIDEO OUT jack of the Player to the corresponding VIDEO IN jack on yourTV. Use the
supplied video cable, which has yellow ends. On theTV, the VIDEO IN jack is usually yellow and might be labeled video,
CVBS, composite, or baseband.
Connect the supplied audio cable to the red and white AUDIO OUT (right and left) jacks on the Player
and to the right/left AUDIO IN jacks on theTV. The supplied audio cable has red and white ends. Match the cable
colors to the jack colors. On the TV, the AUDIO IN jacks are usually labeled Audio.The red jack is the right (stereo
channel) and the white jack is the left (stereo channel).
Set the PROGRESSIVE/INTERLACE switch to INTERLACE.
Plug the power cords of the Player and theTV into an active power outlet.
Press the STANDBY-ON button on the front of the Player to turn on the Player.
Turn on theTV power. Set theTV to the correctVideo In channel. Such channels may be called AUX or
AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.These channels are often near channel 00.
See your TV manual for details. Or, change TV channels until you see the Player’s blue screen saver on the TV.
Connect the Player directly to the TV. For example, do not connect the Player to aVCR, then connect theVCR to a TV.This
type of connection may distort the picture and sound or give you a black and white picture.Also, yourVCR might have the
copy protection system, which could distort the DVD image or prevent playback of some Discs.
If yourTV does not have red, white, and yellow Audio andVideo In jacks, refer to the owner’s manual for other hookup options. If
yourTV only has a single Antenna In or RF In jack, you will need an RF modulator. See the owner’s manual for details.