User manual Philips DVP 3100V

If you found this page, you probably have a problem and you need a user manual for the device Philips DVP 3100V. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips DVP 3100V it belongs to the category DVD Player. A user manualPhilips DVP 3100V is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips DVP 3100V directly. You can view the user manualPhilips DVP 3100V directly online or save and store it on your computer.

Before Operation - VCR part  
Using your DVD+VCR for the very first time  
Tuning in a video channel on your  
TV  
For the following steps we assume that you have just  
connected your DVD+VCR for the very first time.  
To make tuning TV stations an easy task your DVD+VCR  
incorporates the Automatic Channel Memory  
System (ACMS).This system will automatically tune,  
store TV channels in your DVD+VCR.  
Video channel (RF output channel) is the channel on  
which your TV receives picture and sound signals from the  
DVD+VCR through the RF cable.  
If you have used a SCART lead you will not have to tune  
yourTV, simply select the AV channel.The AV channel is  
already pre-tuned for optimum video playback on yourTV.  
Make sure that you have correctly installed your  
DVD+VCR.  
1
Perform the following steps only if interference appears in  
the TV picture after you have moved to a different area or  
a new station has started broadcasting in your area, or if  
you change the connection from RF connection to AV  
connection, or vise versa.  
Press 1 to turn on your DVD+VCR.  
If the initial Menu Screen doesn’t appear on screen, make  
sure that you have tuned your TV to a video channel. Or if  
this is correct it may mean that your DVD+VCR is already  
tuned.  
Turn on DVD+VCR andTV.  
1 Set the vacant position 36 on yourTV.  
ACMS  
2
Pr-12  
ACMS  
OK i  
Press 1on the remote control to enter the standby  
mode (the clock indicator will be dimmed).  
3
4
Press OK to start the automatic tuning process.  
2
3
Press and hold CHANNEL 3 or 4 on the DVD+  
VCR for more than 4 secs.  
0
0
1
2
C02  
C03  
C04  
00  
00  
00  
RF 36 will appear in the DVD+VCR display.  
The following picture will be displayed on the TV screen.  
03  
S
E
Pr-12  
ACMS  
i
RF CHANNEL  
36  
Press SYSTEM MENU to remove the menus from  
theTV screen.  
If the picture is snowy, move to step 5. If the picture is  
clean, press 1 on the DVD+VCR to finish.  
Press CHANNEL 3 or 4on the DVD+VCR to set  
5
the video channel to a vacant position between 22  
and 68 which is not occupied by any local station in  
your area.  
Note  
The RF channel will not change until step 6 has been  
executed.  
Press 1 to store the new RF video channel into the  
6
DVD+VCR memory.  
Now tune yourTV set to the new DVD+VCR RF  
channel.  
Note  
If the TV picture was clear in step 4, do not retune your  
TV.  
1
2

In addition to the user manual Philips DVP 3100V, we also provide a support panel to help you solve your problems with Philips DVP 3100V. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips DVP 3100V. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips DVP 3100V - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.