User manual Philips DVP1033

If you found this page, you probably have a problem and you need a user manual for the device Philips DVP1033. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips DVP1033 it belongs to the category DVD Player. A user manualPhilips DVP1033 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips DVP1033 directly. You can view the user manualPhilips DVP1033 directly online or save and store it on your computer.

[
Analogue Output]  
‡ꢀ >ꢁꢋꢌꢍꢃN+]@- Convert to four times the original  
sampling rate.  
Select an analogue setting based on the audio  
device that is connected through the analogue  
audio jack.  
[Night Mode]  
Make loud sound level softer and soft sound level  
louder so that you can watch the DVD movies at a  
low volume, without disturbing others.  
‡ꢀ [On] - Enjoy quiet viewing at night.  
‡ꢀ [Off] - Enjoy surround sound with a full  
dynamic range.  
‡
[LT/RT] - For the surround sound output  
through two speakers.  
‡
[
Digital Audio]  
HOHFWꢀDꢀGLJLWDOꢀVHWWLQJꢀEDVHGꢀRQꢀWKHꢀGLJLWDOꢀDPSOLÀHUꢇ  
[Stereo] - For the stereo output.  
6
receiver that is connected through the digital jack  
(coaxial/digital).  
Note  
‡
[Digital Output] - Select a type of digital  
output.  
‡ Applicable only to Dolby Digital encoded DVDs.  
‡
[All] - Support multi-channel audio  
formats.  
[Off] - Disable digital output.  
[PCM Only] - Downmix to two-channel  
audio format.  
‡
‡
Video setup  
‡
[LPCM Output] - Select the LPCM (Linear  
Pulse Code Modulation) output sampling rate.  
‡
‡
>ꢃꢎN+=@- For discs recorded at sampling  
rate of 48 kHz.  
>ꢂꢌN+=@- For discs recorded at sampling  
rate of 96 kHz.  
Note  
‡
‡
[LPCM Output] setting is only available if the [Digital  
Output] is set to [PCM Only].  
The higher the sampling rate, the better the sound  
quality.  
Press SETUP.  
» >*HQHUDOꢀ6HWXS@menu is displayed.  
2
Press to select [Video Setup], and then  
[
Volume]  
press to enter the submenu.  
Set the default volume level when you play a disc.  
3
Select an option, and then press OK.  
Select a setting, and then press OK.  
1
2
3
. Press OK.  
. Press  
. Press OKꢀWRꢀFRQÀUPꢀDQGꢀH[LWꢁ  
‡
To return to the previous menu, press  
BACK.  
To exit the menu, press SETUP.  
to set the volume.  
‡
[
TV System]  
[
Sound Mode]  
Change this setting if the video does not appear  
correctly. By default, this setting matches the most  
common setting for TVs in your country.  
Select a preset sound effect to enhance the audio  
output.  
‡
[3D] - Select a virtual surround sound effect  
that is produced from the left and right audio  
channels.  
‡
‡
[PAL] - For a PAL-system TV.  
[Multi] - For TV that is compatible with both  
PAL and NTSC.  
‡
‡
[Movie Mode] - Select a sound effect for  
movies.  
‡
[NTSC] - For an NTSC-system TV.  
[
TV Display]  
[Music Mode] - Select a sound effect for  
music.  
Select a display format:  
[
CD Upsampling]  
For better sound quality in stereo mode, convert  
the music CD to a higher sampling rate.  
‡
‡
[Off] - Turn off CD-upsampling.  
>ꢎꢎꢍꢆN+]@- Convert to twice the original  
sampling rate.  
EN 13  

In addition to the user manual Philips DVP1033, we also provide a support panel to help you solve your problems with Philips DVP1033. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips DVP1033. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips DVP1033 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.