User manual Philips DVP632/05

If you found this page, you probably have a problem and you need a user manual for the device Philips DVP632/05. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips DVP632/05 it belongs to the category DVD Player. A user manualPhilips DVP632/05 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips DVP632/05 directly. You can view the user manualPhilips DVP632/05 directly online or save and store it on your computer.

4
. Software Upgrade Procedure  
Note: Do not press any button or unplug the Mains/AC during upgrade.  
1.  
Connect the Mains/AC cord to the wall socket. PressSTANDBY -ON button on the front-panel or “  
POWER” button on the remote control to activate the player.  
2.  
3.  
4.  
Press “ OPEN/CLOSE to open the disc tray.  
Insert the upgrade CD-ROM disc, label side up.  
Press “ OPEN/CLOSE to close the disc tray.  
·
TV screen will show : “DISC LOADING” “FLASH” “DVPXX.ROM” “READING” “FLASH” “ERASE”  
“WRITE” “DONE”.  
·
·
·
Player display will show : “LOADING “ERASE” “WRITE” “DONE”.  
This stage of the procedure takes about 2 minutes.  
If the software was successfully downloaded, the DVD-player will turn Off automatically.  
5.  
Unplug the Mains/AC cord from the wall socket.  
6
.
After 15 seconds, reconnect the Mains/AC cord to the wall socket and turn On the Mains/AC supply.  
Press “ OPEN/CLOSE” button on the Front Panel to activate the player.  
7
.
The player will initialise for the first 3-4 seconds. Do not press any other buttons.  
After 3-4 seconds delay , the disc tray will open.  
·
Remove the disc immediately.  
Note : If for some reason the disc tray did not open , allow the player to repeat the upgrade until it  
turns Off automatically again. Then follow the instructions above again to remove the disc.  
Never interrupt the upgrading midway as this will damage the player. Always wait till the player has  
turn Off automatically.  
8.  
The DVD-player will function as per normal.  
Note: If the display shows “FAIL”, please refer to the Philips Care Center.  
After the upgrade  
Do confirm the software version by checking the system version.  
Please follow the procedure described in the section “Software Version Verification Procedures” .  

In addition to the user manual Philips DVP632/05, we also provide a support panel to help you solve your problems with Philips DVP632/05. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips DVP632/05. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips DVP632/05 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.