User manual Philips MCD139B/12

If you found this page, you probably have a problem and you need a user manual for the device Philips MCD139B/12. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips MCD139B/12 it belongs to the category DVD Player. A user manualPhilips MCD139B/12 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips MCD139B/12 directly. You can view the user manualPhilips MCD139B/12 directly online or save and store it on your computer.

Connections  
Step 1: Placing speakers and  
subwoofer  
Step 2: Connecting speakers  
and subwoofer  
6
8
AC MAINS  
~
For best possible surround sound, locate your  
speakers and subwoofer as follows:  
Connect the supplied DIN cable to DVD player’s  
DIN jack and the left speaker’s DIN jack.  
Place the left and right speakers at equal  
distances from theTV set and at an angle of  
approximately 45 degrees from the listening  
position.  
Connect the supplied speaker wires of the right  
speaker to SPEAKER RIGHT on the left speaker,  
red wire to red jack ( “+” ), black wire to black  
jack ( “-“ ). Fully insert the stripped portion of  
the speaker wire into the terminal as shown.  
Place the subwoofer on the floor.  
Notes:  
To avoid magnetic interference, position the  
speakers, subwoofer as far as possible from the  
main unit,TV set or other radiation source.  
Allow adequate ventilation around the DVD  
System.  
IMPORTANT!  
The type plate is located on the bottom  
of the system.  
Connect the supplied speaker wire of the  
subwoofer to SUBWOOFER OUT on the left  
speaker, green wire to green jack (“+” ), white  
wire to white jack (“-” ).  
To avoid overheating of the system, a  
safety circuit has been built in. Therefore,  
your system may switch to Standby  
mode automatically under extreme  
conditions. If this happens,let the system  
cool down before reusing it.  
Notes:  
For optimal sound performance, use the  
supplied speakers.  
Do not connect more than one speaker to any  
one pair of +/- speaker terminals.  
Do not connect speakers with an impedance  
lower than the speakers supplied. Please refer to  
the SPECIFICATIONS section of this manual.  
1
0
pg001-038_MCD139B_12_Eng  
10  
2007.5.9, 16:42  

In addition to the user manual Philips MCD139B/12, we also provide a support panel to help you solve your problems with Philips MCD139B/12. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips MCD139B/12. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips MCD139B/12 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.