User manual Philips MCD139B/12

If you found this page, you probably have a problem and you need a user manual for the device Philips MCD139B/12. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Philips MCD139B/12 it belongs to the category DVD Player. A user manualPhilips MCD139B/12 is taken from the manufacturer, a Philips company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Philips MCD139B/12 directly. You can view the user manualPhilips MCD139B/12 directly online or save and store it on your computer.

Connections  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN1 (L/R) jacks to the  
Step 3: ConnectingTV set  
IMPORTANT!  
HEADPHONE jacks on theTV set (with a  
You only need to make one video  
3
.5mm-diameter stereo jack).  
connection from the following options,  
according to the capabilities of yourTV  
system.  
Before starting operation, press AUX1/2/TV on  
the remote control to select “AUX 1” in order  
to activate the input source.  
S-Video or ComponentVideo  
connection provides higher picture  
quality. These options must be available  
on yourTV set.  
Using componentVideo In jack (Pr PbY)  
set.  
Connect the system directly to theTV  
Use the component video cables (red/blue/  
green, not supplied) to connect the system’s PR/  
PB/Y jacks to the corresponding Component  
video input jacks (or labeled as Pr/Cr Pb/CbY or  
YUV) on theTV set.  
Using Video In jack (CVBS)  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN1 (L/R) jacks to the  
corresponding AUDIO OUT jacks on theTV set.  
Use the supplied composite video cable (yellow)  
to connect the system’s COMPOSITE  
VIDEO jack to the video input jack (or labeled  
as A/V In,Video In, Composite or Baseband) on  
theTV set.  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN1 (L/R) jacks to the  
Notes for progressive scan video:  
possible when usingY Pb Pr, and a progressive scan  
TV is required.  
The progressive scan video quality is only  
corresponding AUDIO OUT jacks on theTV set.  
Using Headphone jack  
If you are using a Progressive ScanTV (TV must  
indicate Progressive Scan or ProScan capability), to  
activateTV Progressive Scan,please refer to yourTV  
user manual.For DVD system’s Progressive Scan  
function,see “Getting Started - Setting up  
Progressive Scan feature’’.  
If yourTV does not support Progressive Scan,you  
will not be able to view the picture.Turn off  
progressive scan in PROGRESSIVE menu of the  
system setup menu.  
1
1
pg001-038_MCD139B_12_Eng  
11  
2007.5.9, 16:42  

In addition to the user manual Philips MCD139B/12, we also provide a support panel to help you solve your problems with Philips MCD139B/12. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Philips MCD139B/12. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Philips MCD139B/12 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.