W:\PRODUCCIO\ENERO 2010\4056 AZ1N RC\4-168-148-
40SAF.fm Page 9 Monday, January 11, 2010 11:09 AM
Leave space around the TV set as shown
It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Do not use the supplied mains lead on
any other equipment.
Installed on the wall
Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
Do not modify the mains lead.
Do not put anything heavy on the mains
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Do not pull on the mains lead itself when
disconnecting the mains lead.
Do not connect too many appliances to
the same mains socket.
The TV set should be installed near an
easily accessible mains socket.
Place the TV set on a stable, level
Only qualified service personnel should
carry out wall installations.
For safety reasons, it is strongly
recommended that you use Sony
Leave at least this space around
Do not use a poor fitting mains socket.
Installed with stand
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Wall-mount bracket SU-WL500
EX6/NX5xx, KDL-37EX4xx, KDL-
Wall-mount bracket SU-WL100
Leave at least this space around
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
To ensure proper ventilation and prevent
the collection of dirt or dust:
Do not lay the TV set flat, install
upside down, backwards, or
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
• To prevent the spread of fire,
keep candles or other open
flames away from this
The diameter and length of the screws
differ depending on the Wall-mount
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
product at all time.
Places that are hot, humid, or
Do not install the TV set as shown
excessively dusty; where insects may
enter; where it might be exposed to
mechanical vibration, near flammable
objects (candles, etc). The TV set shall
not be exposed to dripping or splashing
and no objects filled with liquids, such
as vases, shall be placed on the TV.
mm - 12 mm
Air circulation is blocked.
Screw (supplied with the
Hook attachment on rear
of TV set
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Two or three
people are needed
to transport a large
Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
If the surface of the TV set cracks, do not
touch it until you have unplugged the
mains lead. Otherwise electric shock
TV set by hand,
hold it as shown
on the right. Do
not put stress on
the LCD panel.
When lifting or
moving the TV
set, hold it firmly
from the bottom.
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
Operate the TV set on a 220–240 V AC
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
When not in use
If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
When transporting the TV set, do not
subject it to jolts or excessive vibration.
When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
Keep the mains lead away from heat
Unplug the mains plug and clean it
regularly. If the plug is covered with
Never cover the ventilation holes or
insert anything in the cabinet.