User manual Sony PFM-510A2WG

If you found this page, you probably have a problem and you need a user manual for the device Sony PFM-510A2WG. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Sony PFM-510A2WG it belongs to the category Flat Panel Television. A user manualSony PFM-510A2WG is taken from the manufacturer, a Sony company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Sony PFM-510A2WG directly. You can view the user manualSony PFM-510A2WG directly online or save and store it on your computer.

Location and Function of Parts and Controls  
5
Y/C button  
qkMENU button  
Selects the signal input from the Y/C IN jack in the  
LINE connectors.  
Press to make the menu appear.  
qlENTER button  
6
Number buttons  
Press to select the desired item in a menu.  
Press to select the index number.  
w;VOL +/– buttons  
7
ZOOM button  
Press the + button to increase the volume, or the –  
button to decrease the volume.  
Each time you press this button, the image size  
changes (in order) to double (×2), triple (×3),  
quadruple (×4) and original size.  
waCH +/– buttons  
This button does not operate with the monitor.  
8
STILL button  
This button does not operate with the monitor.  
Installing batteries  
9
POWER ON switch  
Insert two size AA (R6) batteries in correct polarity.  
Press to turn on the monitor. When you use multiple  
monitors, you can use this switch instead of the  
POWER switch 1so as not to affect another monitor  
which may be already turned on.  
Be sure to  
install the  
negative <–  
end first.  
0
POWER OFF switch  
Press to turn the monitor to the standby mode. When  
you use multiple monitors, you can use this switch  
instead of the POWER switch 1so as not to affect  
another monitor which may be in the standby mode.  
E
e
e
E
qaID MODE (ON/SET/OFF) buttons  
Press the ON button to make an index number appear  
on the screen. Then press the index number of the  
monitor you want to operate and press the SET button.  
After you finish the operation, press the OFF button to  
return to the normal mode.  
• In normal operation, batteries will last up to half a  
year. If the Remote Commander does not operate  
properly, the batteries might be exhausted sooner.  
Replace them with new ones.  
qsDISPLAY button  
Displays the input signal information and the time at  
the top of the monitor screen. Press again to clear it.  
To avoid damage from possible battery leakage,  
remove the batteries if you do not plan to use the  
Remote Commander for a fairly long time.  
qdYUV button  
Selects the component signal input from the RGB1  
connectors.  
When the Remote Commander does not work  
Check that the 1 indicator lights up. The Remote  
Commander operates the monitor only when the  
monitor is turned on, or it is in the standby mode.  
qfMTS/MPX button  
This button does not operate with the monitor.  
Note  
qgCH button  
When you use multiple monitors, if you connect the  
cable to the CONTROL S IN jack on the side of the  
monitor, you cannot operate the monitor with the  
Remote Commander.  
This button does not operate with the monitor.  
qhDEGAUSS button  
This button does not operate with the monitor.  
qjSELECT +M/–m buttons  
Press to move the cursor (B) to an item or to adjust a  
value in a menu.  
12(GB)  

In addition to the user manual Sony PFM-510A2WG, we also provide a support panel to help you solve your problems with Sony PFM-510A2WG. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Sony PFM-510A2WG. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Sony PFM-510A2WG - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.