Quick Setup Guide
Connecting an audio device (Home Theater, etc.)
Step 4: Connect External Devices
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
Connect your TV to your Home Theater or other
audio device to enjoy enhanced Sound quality.
Analog Audio connection
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Using an Audio Cable
1
-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
5 Challenger Road Ridgeꢀeld Park, NJ 07660-2112
STOP
Use one of the connections below to connect your
TV to an external A/V device.
We recommend using HDMI for the highest picture
quality.
Ampliꢀer / DVD home theater
8
Best Connection
Please do not return this unit.
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
AUDIO IN
If you have problems operating your
TV, call:
HD connection (up to 1080p)
1
-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
Using an HDMI Cable
Audio Cable (Not Supplied)
✎
When connecting to AV IN, the color of the
AV IN [Y/VIDEO] jack (green) will not match the
video cable (yellow).
HDMI Cable (Not Supplied)
Digital Audio connection
HDMI OUT
DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box) satellite
receiver
Using an Optical Cable
Digital Audio System
Device
Optical Cable (Not Supplied)
OPTICAL
Step 1: Install the Stand
Very Good Connection
Follow the steps below to connect the TV to the stand. (50 inch model only)
HD connection (up to 1080p)
✎
NOTE
HDMI to DVI Cable (Not Supplied)
Using an HDMI to DVI Cable
Connecting a PC
x
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
Connect your TV to a PC to use it as a Monitor.
DVI OUT
x
x
Make sure that at least two persons lift and move the PDP TV.
HDMI to DVI Cable
(Not Supplied)
HD connection
Device
AUDIO OUT
Stand the product up and fasten the screws. If you fasten the screws with
the PDP TV placed down, it may lean to one side.
Using an HDMI to DVI Cable
DVI OUT
Audio Cable (Not Supplied)
Top view
Screws (M4 X L12)
AUDIO OUT
s
s
Lowest Quality Connection
Good Connection
Guide Stand
Stand
s
s
s
Audio/Video connection (480i only)
Component connection (up to 1080p)
Audio Cable (Not Supplied)
Front
Rear
Audio Cable (Not Supplied)
Video Cable (Not Supplied)
Using an Audio/Video Cable
Component Cable (Not Supplied)
Audio Cable (Not Supplied)
Using a Component Cable
1
2
ꢀ
Connect the Guide Stand to the
AUDIO OUT
VIDEO OUT
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Audio Cable (Not Supplied)
Using a D-Sub Cable
COMPONENT OUT
Stand using ꢀve screws (M4 X L12)
as shown.
AUDIO OUT
Rear
Device
Device
D-Sub Cable (Not Supplied)
PC OUT
AUDIO OUT
ꢀ
TWVithtoytohuerSTtVanudp.right, connect the 3ꢀ Fpaosstiteionntw1o,sacnrdewthse(nMf4asXteLn10th)raete
screws (M4 X L10) at position 2.
Changing the Picture Mode
Step 5: Run Plug & Play
6ꢀ ESNeleTcEtRthEe Dbauytlitgohnt.savings time setting: Off or On, and then press the
Screws (M4 X L12)
2
s
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV’s channel memorizing process.
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under speciꢀc conditions.
The Picture Modes are listed and described in the table below:
s
s
s
s
s
s
s
s
s
7ꢀ Select the time zone in which you live, and then press the ENTERE button.
8ꢀ Aquftaelritythies tdimispelazoyende.sPcrreesesn,thTeheRicgohntnaerrcotwionbumtteothnoodnfoyorubrersetmHoDtesctoreveienw
each screen in succession. Press the Blue button to skip this section.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the MENU button. To turn on your TV, press the POWER
Mode
Rear
1
Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard
Relax
For a bright, detailed picture in a normally lit room.
button on the remote or on the TV. To run Plug & Play, follow these steps:
9ꢀ The Enjoy your TV. screen appears. Then press the ENTERE button.
Step 2: Install the Batteries into the Remote
For a comfortable, easy-on-the-eyes picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
To install batteries into your remote control,
follow these steps:
1ꢀ sUesliencgt ythoeurlarnegmuoatgeecfoonrttrhoel, On
Screen Display (OSD), and then
Plug & Play
Movie
Changing the Screen Size
Select Language of the OSD.
English
Español
Français
1
.
Lift the cover on the back of the remote
upward as shown in the ꢀgure to the
right.
Your TV has several screen size options, each designed to work best with speciꢀc
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The ꢀrst time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
To change the Picture Mode, follow these steps:
1. Turn on your TV, press the TOOLS button on your remote.
The Tools menu appears.
press the ENTERE button.
Menu Language
:
2
3
ꢀ
ꢀ
Select Home Use, and then
press the ENTERE button.
U Move E Enter
2
.
Install two AAA batteries.
2. Using the ▲ or ▼ on your remote, select Picture Mode.
✎
Make sure to match the + and -
ends of the batteries to the diagram in the battery compartment.
Replace the cover.
If you select Store Demo, the TV will reset your picture and audio settings
3. On the Picture Mode menu, use the ◄ or ► button on your remote to select
the Picture Mode you want.
every 30 minutes.
The following sizes are available:
3
.
4. Press the EXIT button to exit the menu.
Select Antenna Source and Channel Source. If Antenna Source is
Cable or Auto, you must select Channel Source to same type as your
cable system type. After selecting source, select Search; then press the
ENTERE button on your remote.
Setting the Clock
Step 3: Connect Power and Antenna or Cable
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV, press the MENU button on your remote, then select Setup →
Time.
✎
Most cable systems are Standard (STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
16:9 Widescreen
4:3 Standard screen
Wide Fit
VHF/UHF Antenna
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
Antenna Cable
Connect Ant In to
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
(Not Supplied)
•
•
•
Wall cable jack
VHF/UHF Antenna
Cable or Satellite box
Ant or Cable Out
Zoom 1
Zoom 2
Screen Fit
4ꢀ mThineuTteVsm. emorizes the available channels. This process can take up to 45
x
x
If you select Auto, the current time will be set automatically using the time
from a digital channel.
or
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
Use a 75 ohm (round) cable.
5
ꢀ
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
if you have a cable or satellite box. When done, press the ENTERE button.
4
.
Press the RETURN button on your remote when done.
✎
If you select Manual, the clock setting screen appears.
[
QSG]BN68-02618A-02Eng.indd
1
2010-09-03 오후 5:49:00
Have you got problems with your device? Ask a question - our users can help you