User manual Samsung BN68-02767A-00

If you found this page, you probably have a problem and you need a user manual for the device Samsung BN68-02767A-00. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung BN68-02767A-00 it belongs to the category Flat Panel Television. A user manualSamsung BN68-02767A-00 is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung BN68-02767A-00 directly. You can view the user manualSamsung BN68-02767A-00 directly online or save and store it on your computer.

x
x
x
In PC mode, only 16:9 and 4:3 modes can be  
adjusted.  
Picture Options  
In PC mode, you can only make changes to the  
Colour Tone, Size and Auto Protection Time.  
Settings can be adjusted and stored for each  
external device connected to an input on the TV.  
Picture Options  
After selecting Screen Fit in HDMI (1080i / 1080p)  
or Component (1080i / 1080p) mode: Adjusts the  
Position or Size by using , , , button.  
Colour Tone  
: Normal  
: 16:9  
Size  
x
Ifyou use the Screen Fit function with HDMI 720p  
input, 1 line will be cut at the top, bottom, left and  
right as in the overscan function.  
Digital Noise Filter  
MPEG Noise Filter  
HDMI Black Level  
Film Mode  
: Auto  
: Auto  
: Normal  
: Off  
Digital Noise Filter (Off / Low / Medium / High / Auto  
Auto Visualisation / Demo): When the broadcast  
signal is weak, some static and ghosting may appear.  
Select one ofthe options until the best picture is  
displayed.  
/
Auto Protection Time  
: 2 hours  
U Move  
E
Enter  
R
Return  
Auto Visualisation: When changing analogue channels,  
displays the intensity ofthe current signal and deꢀnes  
the screen noise ꢀlter.  
Colour Tone (Cool / Normal / Warm1 / Warm2)  
Warm1 or Warm2 will be deactivated when the picture  
mode is Dynamic.  
MPEG Noise Filter (Off / Low / Medium / High /  
Auto): Reduces MPEG noise to provide improved  
picture quality.  
Settings can be adjusted and stored for each external  
device connected to an input on the TV.  
HDMI Black Level (Normal / Low): Selects the black  
Size: Your cable box/satellite receiver may  
have its own set ofscreen sizes as well.  
However, we highly recommend you use  
level on the screen to adjust the screen depth.  
P.SIZE  
Available only in HDMI mode (RGB signals).  
1
6:9 mode most ofthe time.  
Film Mode (Off / Auto1 / Auto2): Sets the TV to  
automatically sense and process ꢀlm signals from all  
sources and adjust the picture for optimum quality.  
1
6:9 : Adjusts the picture size to 16:9 for  
DVDs or wide broadcasting.  
Wide Zoom: Magniꢀes the picture size  
more than 4:3.  
Available in TV, AV, COMPONENT (480i / 1080i)  
and HDMI (480i / 1080i).  
Adjusts the Position by using , buttons.  
Auto Protection Time (2 hours / 4 hours / 8 hours  
10 hours / Off): Ifthe screen remains idle with a still  
/
Zoom: Magniꢀes the 16:9 wide pictures vertically to ꢀt  
the screen size.  
image for a certain period oftime deꢀned by the user,  
the screen saver is activated to prevent the formation of  
ghost images on the screen.  
Adjusts the Position or Size by using , ▼  
button.  
4
:3: The default setting for a movie or normal  
broadcasting.  
Do not watch in 4:3 format for a long time. Traces  
ofborders displayed on the left, right and centre  
ofthe screen may cause image retention(screen  
burn) which are not covered by the warranty.  
Picture Reset (OK / Cancel)  
Resets your current picture mode to its default settings.  
¦
Setting up the TV with Your PC  
Screen Fit: Displays the full image without any cut-off  
when HDMI (720p / 1080i / 1080p) or Component  
Set the input source to PC.  
(
1080i / 1080p) signals are inputted.  
Auto Adjustment  
NOTE  
Adjust frequency values/positions and ꢀne tune the settings  
automatically.  
x
x
Depending on the input source, the picture size  
options may vary.  
The available items may differ depending on the  
selected mode.  
Not available when connecting with an HDMI/DVI cable.  
English 15  
[
UC4000_Asia]BN68-02767A-X0Eng.indb 15  
2010-03-03 오후 5:35:27  

In addition to the user manual Samsung BN68-02767A-00, we also provide a support panel to help you solve your problems with Samsung BN68-02767A-00. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung BN68-02767A-00. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung BN68-02767A-00 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.