User manual Samsung HP-S4273

If you found this page, you probably have a problem and you need a user manual for the device Samsung HP-S4273. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung HP-S4273 it belongs to the category Flat Panel Television. A user manualSamsung HP-S4273 is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung HP-S4273 directly. You can view the user manualSamsung HP-S4273 directly online or save and store it on your computer.

BN68-00991K-01Eng 8/7/06 12:58 PM Page 10  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable without a Cable Box  
1
. Plug the incoming cable into the ANT2 IN(CABLE) terminal on the back of the TV.  
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.  
ANT2 IN (CABLE)  
Connecting to a Cable Box that Descrambles All Channels  
1
. Find the cable that is connected to the ANT OUT terminal on your cable box.  
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.  
ANT IN  
ANT OUT  
2
.
Connect the other end of this cable to the ANT2 IN(CABLE) terminal on the back of the TV.  
ANT2 IN (CABLE)  
Connecting to a Cable Box that Descrambles Some Channels  
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way  
splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)  
1
2
. Find and disconnect the cable that is  
connected to the ANT IN terminal on your  
cable box.  
ANT IN  
This terminal might be labeled “ANT IN”,  
“VHF IN” or simply, “IN”.  
. Connect this cable to a two-way splitter.  
Incoming  
cable  
Splitter  
3
4
. Connect an Antenna cable between an  
OUTPUT terminal on the splitter and the  
IN terminal on the cable box.  
Incoming  
cable  
Splitter  
Cable Box  
. Connect an Antenna cable between the  
ANT OUT terminal on the cable box and  
the B–IN terminal on the RF(A/B) switch.  
Incoming  
cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
5
6
. Connect another cable between the other  
OUT terminal on the splitter and the A–IN  
terminal on the RF (A/B) switch.  
Incoming  
cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
. Connect the last Antenna cable between the  
OUT terminal on the RF (A/B) switch and  
the ANT2 IN(CABLE) terminal on the rear of  
the TV.  
TV Rear  
Incoming  
cable  
ANT2 IN(CABLE)  
Splitter  
RF (A/B)  
Switch  
Cable Box  
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled  
channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)  
English-10  

In addition to the user manual Samsung HP-S4273, we also provide a support panel to help you solve your problems with Samsung HP-S4273. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung HP-S4273. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung HP-S4273 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.