User manual Samsung LED LCD TV UN32EH4003FXZA

If you found this page, you probably have a problem and you need a user manual for the device Samsung LED LCD TV UN32EH4003FXZA. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung LED LCD TV UN32EH4003FXZA it belongs to the category Flat Panel Television. A user manualSamsung LED LCD TV UN32EH4003FXZA is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung LED LCD TV UN32EH4003FXZA directly. You can view the user manualSamsung LED LCD TV UN32EH4003FXZA directly online or save and store it on your computer.

Advanced Settings  
Available in Standard and Movie mode only.  
Screen Fit: Displays the full image without any cut-off when  
your TV is inputting HDMI (720p 1080i  
1080p) or Component Digital channels only.  
(1080i 1080p) HD signals.  
HD (High Definition) has  
Preferred Language  
Air  
If your TV is connected to an antenna choose Air, and then press  
Remote control buttons active on the Channel List screen.  
The On Screen Menus  
Your TV has two kinds of menus, the Main menu and the various  
Tools menus. The Main menu gives you access to most or all of  
the menu options available on your TV. The Tools menus display  
/
/
x
x
Green (Zoom): Enlarges or shrinks  
Yellow (Select): Move the cursor to a channel. Press the Yellow  
c
a
channel number.  
/
ENTERE. The TV will automatically start memorizing channels.  
Compared to previous models, new Samsung TVs offer  
precise picture with more precise controls.  
a
more  
a
16:9 aspect ratio and 1080i/1080p Digital-TV broadcasts can transmit many audio tracks  
button to select the channel.  
A
mark appears. Repeat to  
(1920x1080) or 720p (1280x720) resolution.  
simultaneously (for example, simultaneous translations of  
into foreign languages).  
a
program  
Cable  
If your TV is connected to  
press ENTERE. Go to Step 3.  
select additional channels. Then, open the Tools menu and apply  
a function to the channels you selected.  
(Tools): Displays the Channel List Tools menu. (The Tools  
menus may differ depending on the situation.)  
a
selected number of frequently used menu options that change  
depending on the screen you are viewing. Tools menu symbol (T)  
Tools menu is  
When your TV is connected to  
changes to Gamma and White Balance.  
a
PC, you can only make  
You can adjust and store settings for each external device you  
have connected to an input on the TV. Picture Sizes available  
by Input Source are listed below:  
You can only select  
broadcast.  
a
language from among the ones being  
a
cable outlet, choose Cable, and then  
x
T
LED TV  
in the lower right side of the screen indicates that  
available.  
A
a
Color Space (Auto  
range of colors available to create pictures to the color range of  
the video source. Native provides  
color range of the video source.  
White Balance: Adjusts the color temperature of the picture so  
that white objects look white (instead of, for example, slightly  
pink or slightly yellow) and the overall color of the picture looks  
natural.  
/
Native): Auto automatically matches the  
Auto  
If you choose Auto, and then press ENTERE, the TV will  
automatically select the correct Antenna source. Go to Step 3.  
3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to  
select the type of digital and analog cable systems you have:  
STD, HRC, or IRC. Most systems are STD (Standard). When  
done, select Start, and then press ENTERE. The TV will start  
memorizing channels.  
Display Icons Used in the Channel List Screens  
The Main menu has seven primary categories:  
a
color range wider than the  
Input Source  
Picture Size  
Multi-Track Sound (MTS)  
Analog channels only.  
Icons  
Meaning  
user manual  
16:9, Zoom1, Zoom2,  
4:3  
Mono: Select for channels that are broadcasting in mono or if  
you are having difꢀculty receiving stereo signal.  
c
A
A
A
A
selected channel.  
Favorite channel.  
reserved program.  
y
y
y
y
Picture  
Sound  
Channel  
Setup  
y
y
y
Input  
ATV, AV, Component (480i, 480p)  
a
*
Application  
Support  
DTV (1080i, 1080p), Component (1080i,  
1080p), HDMI (720p, 1080i, 1080p)  
16:9, Wide Fit, 4:3,  
Screen Fit  
Stereo: Select for channels that are broadcasting in stereo.  
SAP: Select to listen to the Separate Audio Program, which is  
R-Offset  
blue) darkness.  
R-Gain G-Gain  
blue) brightness.  
/
G-Offset  
/
B-Offset: Adjusts each color’s (red, green,  
usually  
a
foreign-language translation.  
Channel memorization can take up to 45 minutes,  
depending on your cable system.  
Memorized channels are added to the Added Channels  
list. These are the channels you will see when you use the  
Channel buttons on your remote.  
(
program currently being broadcast.  
Figures and illustrations in this User Manual are provided for reference  
only and may differ from actual product appearance. Product design and  
speciꢀcations may be changed without notice.  
Conditions covered are limited only to manufacturing defects in  
/
/
B-Gain: Adjusts each color’s (red, green,  
Digital Noise Filter (Off  
/
Low  
/
Medium  
/
High  
/
Auto)  
:
If the  
Depending on the program being broadcast, you can listen to  
Mono, Stereo or SAP.  
material or workmanship, and only those encountered in normal  
use of the product. Excluded, but not limited to, are any originally  
speciꢀed provisions for, in-home or on-site services, minimum or  
maximum repair times, exchanges or replacements, accessories,  
options, upgrades, or consumables.  
To view the Main menu, press the MENU button on your remote. To  
view a Tools menu, press the TOOLS button on your remote.  
The Channel List Tools Menu t  
The Channel List Tools menu contains most of the functions you  
Reset: Resets the White Balance to it’s default settings.  
Gamma: Adjusts the primary color intensity.  
Dynamic Contrast (Off  
Auto Volume  
Because each station has its own broadcasting conditions, the  
volume may ꢁuctuate each time you change the channel. This  
Important Warranty Information Regarding  
Television Format Viewing  
The menu options that appear in the Main menu depend  
on the Source you have selected. For example, if you have  
selected the HDMI source, the Channel category will not  
appear. To see the Channel category, you must first select TV  
in the Source List.  
When the signal is weak, try all the Digital Noise Filter  
options until the TV displays the best picture.  
can use on the All Channel, Added Channels, and Favorite List  
/
Low  
/
Medium  
/ High): Adjusts the  
Clear Scrambled Channel  
This function ꢀlters out scrambled channels after Auto Program is  
completed. This process may take up to 20~30 minutes.  
screens. To view, select  
a
list screen, select  
a
channel, and then  
See the warranty card for more information on warranty terms. Fcaolrl ttohell-florecea:tion of  
a
SAMSUNG Authorized Service Center, please  
screen contrast.  
HDMI Black Level (Normal  
the black level to adjust the screen depth. Low make blacks look the sound output when the modulation signal is high or by raising  
darker.  
the sound output when the modulation signal is low.  
/
Low)  
:
For HDMI signals, select  
feature automatically adjusts the volume of  
a
channel by lowering  
press the TOOLS button.  
Black Tone (Off  
/
Dark  
/
Darker  
/
Darkest): Selects the black  
Add / Delete: Delete  
a
channel from or add a  
channel to the  
Wide screen format LED Displays (16:9, the aspect ratio of the  
–– In the United States  
:
1-800-SAMSUNG (1-800-726-7864)  
level to adjust the screen depth. Darker settings make blacks  
look darker.  
Press the ENTERE button to stop the Clear Scrambled  
Channel.  
Added Channels list.  
screen width to height) are primarily designed to view wide screen  
format full-motion video. The images displayed on them should  
primarily be in the wide screen 16:9 ratio format, or expanded to  
–– In Canada : 1-800-SAMSUNG  
The Menu options are presented below, arranged by Main menu  
categories.  
Film Mode (Off  
process ꢀlm signals from all sources and adjusts the picture for  
optimum quality.  
Available only in HDMI mode (RGB signals).  
A
name indicates the option is also available in one of the Tools  
menus.  
Tools button symbol (t) next to an option  
/
Auto)  
:
Sets the TV to automatically sense and Sound Reset  
To delete channels from the Added Channels list, follow these  
steps:  
Flesh Tone: Adjusts the amount of red in skin tones.  
This function is only available in Cable mode.  
Still image warning  
Motion Lighting (Off  
/
On): When on, the TV automatically  
Reset All: Resets all sound settings to the factory defaults.  
ll the screen if your model offers this feature and the images are  
Avoid displaying still images (such as jpeg picture ꢀles) or still  
image elements (such as TV channel logos, TV shows or movies  
in panorama or 4:3 format, stock or news scroll bars, etc.) on the  
screen. The constant display of still pictures can cause ghosting or  
image burn-in (image retention) on the LED screen, which will affect  
image quality. To reduce the risk of this effect, please follow the  
recommendations below:  
•ꢀAvoid displaying the same TV channel for long periods.  
guidelines can cause uneven aging of LED Displays that leave subtle, •ꢀAlways try to display any image in full screen mode. Use the TV's  
Picture Options menu to select the optimal screen size.  
1. Select one or more channels in the Added Channels list  
using the ▲/▼ buttons and the Yellow (Select) button on your  
remote.  
constantly moving. Displaying stationary graphics and images on  
screen, such as the dark sidebars on non- expanded standard  
format television video and programming, should be limited to no  
more than 5% of the total television viewing per week. Additionally,  
viewing other stationary images and text such as stock market  
reports, video game displays, station logos, web sites or computer  
graphics and patterns, should be limited as described above for  
all televisions. Displaying stationary images that exceed the above  
adjusts the brightness of the screen in response to the  
brightness of the room. In bright light, the screen brightens. In  
dim light, the screen dims.  
Available in ATV, DTV (interlace), AV, COMPONENT (480i  
1080i) and HDMI (480i 1080i).  
On): Removes drag from fast scenes  
clear picture.  
/
Managing Channels  
/
Channel Menu  
Picture Menu  
Channel List  
See your list of Added channels, Favorite channels, or channels  
you've scheduled for viewing. Add or delete Favorite channels, add  
or delete channels from the Added Channels list, schedule channels  
Available in Standard mode only.  
Picture Options  
When the TV is connected to  
LED Motion Plus (Off  
with  
/
2. Press the TOOLS button on your remote. The Tools menu  
appears.  
a
lot of movement to provide  
a
Mode t  
Select your preferred picture mode.  
Memorizing Channels  
Picture Reset  
Picture Reset (Reset Picture Mode/Cancel): Resets the  
picture settings to their factory defaults.  
When you ꢀrst set up your TV using Plug  
&
Play, the TV  
3. Select Delete in the Tools menu, and then press the ENTERE  
button.  
a
PC, you can only make  
changes to the Color Tone, Size and HDMI Black Level.  
Color Tone (Cool Standard Warm1 Warm2): Cool makes  
and Warm make the picture  
memorized the channels that were available over the air or through  
your cable system and added them to the Channel List. The  
Antenna and Auto program functions described below let you  
re-run the channel memorization function without having to re-run  
or programs for viewing. Watch  
a
channel by selecting the channel  
When your TV is connected to  
Entertain and Standard.  
a
PC, you can only select  
in the All Channels, Added Channels, or Favorite screen, pressing To add channels to the Added Channels list, follow these steps:  
/
/
/
the  
/ buttons, and then pressing the ENTERE button.  
but permanent burned-in ghost images in the LED picture. To avoid  
this, vary the programming and images, and primarily display full  
screen moving images, not stationary patterns or dark bars. On LED  
models that offer picture sizing features, use these controls to view  
Dynamic: Brightens the screen. Suitable for  
Standard: Suitable for normal normal.  
Movie: Darkens the screen, making it less glary. Suitable for  
watching movies in darkened room.  
Entertain: Sharpens the picture. Suitable for games.  
Only available when the TV is connected to PC.  
a
bright room.  
the picture bluer (cooler). Warm  
redder (warmer).  
1
2
1. Select one or more channels in the All Channels list using the  
▲/▼ buttons and the Yellow (Select) button on your remote.  
•ꢀReduce brightness and contrast values to the minimum required  
to achieve the desired picture quality. Values that exceed the  
minimum may speed up the burn-in process.  
6
Air  
a
Sound Menu  
the Plug  
&
Play procedure.  
6-1  
TV #6  
Warm1 and Warm2 are deactivated when the picture  
mode is set to Dynamic.  
2. Press the TOOLS button on your remote. The Tools menu  
appears.  
different formats as  
and duration of television formats you use for viewing. Uneven LED  
aging as result of format selection and use, as well as burned-in  
images, are not covered by your Samsung limited warranty.  
ꢀSAMSUNGꢀELECTRONICSꢀNORTHꢀAMERICANꢀLIMITEDꢀ  
a
full screen picture. Be careful in the selection  
•ꢀFrequently use all TV features designed to reduce image retention  
and screen burn-in. Refer to proper user manual section for details.  
a
Mode t  
Standard: Selects the normal sound mode.  
Music: Emphasizes music over voices.  
Movie: Provides the best sound for movies.  
Clear Voice: Emphasizes voices over other sounds.  
Antenna (Air / Cable) t  
Before your television can memorize the available channels, you  
mCaubstles.eSlecletcytoMureTnVu's>Csihgnaanlnseolu>rcAen, tAeinrn(uas>ingAiarnoarnCteanbnlea.) Aorfter  
e
you have selected the signal source, go on to the Auto Program  
function.  
7-1  
TV #7  
Size: Set the size and aspect ratio of the picture on the screen.  
9
Air  
3. Select Add in the Tools menu, and then press the ENTERE  
button.  
a
a
Your cable box or satellite receiver may have its own set of  
screen sizes as well. However, we highly recommend you use  
the TVs 16:9 mode most of the time.  
16:9: Sets the picture to the 16:9 wide screen format.  
Zoom1: Provides moderate magniꢀcation of the picture. Sides,  
top, and bottom are cut off.  
Zoom2: Provides larger magniꢀcation of the picture. Sides, top,  
and bottom are cut off.  
Wide Fit: Enlarges the aspect ratio of the picture so the picture  
9-1  
10  
TV #9  
Air  
Contact SAMSUNG WORLDWIDE  
Backlight / Contrast / Brightness / Sharpness /  
Color / Tint (G/R)  
Backlight: Adjusts the brightness of the screen by adjusting the  
brightness of the individual pixels.  
Contrast: Increases or decreases the contrast between dark and  
light areas of the picture.  
Brightness: Adjusts the brightness of the screen. Not as  
effective as Backlight.  
10-1  
11-1  
TV #10  
TV #11  
All deleted channels will be shown on the All Channels list.  
You add channels back to the Added Channels list on the  
All Channels list.  
If you have any questions or comments relating to Samsung products,  
please contact the SAMSUNG customer care center.  
WARRANTY STATEMENT  
Air  
' Zoom ' Select T Tools  
Subject to the requirements, conditions, exclusions and limitations  
of the original Limited Warranty supplied with Samsung Electronics  
Amplify: Increase the intensity of high-frequency sounds to allow  
better listening experience for the hearing impaired.  
Selecting the signal source using the Antenna function also  
determines the signal source the TV is tuned to. For example,  
if you receive your TV signal over the air, and you select  
Cable, you will see only snow. You must select Air to see  
picture.  
A gray-colored channel indicates the channel has been  
deleted from the Added Channels list.  
Country  
CANADA  
U.S.A.  
Channel List Screens icons are listed on the left side. Select an  
icon using the ▲/▼ buttons to view each list.  
(
SAMSUNG) products, and the requirements, conditions, exclusions  
Samsung Electronics  
Canada Inc., Customer  
Service 55 Standish Court  
Mississauga, Ontario L5R  
4B2 Canada  
Samsung Electronics  
America, Inc.  
Equalizer  
Available in Standard sound mode only.  
The Add menu option only appears for deleted channels.  
a
All Channels: Shows all currently available channels including  
those you deleted from the Added Channels list.  
and limitations contained herein, SAMSUNG will additionally provide  
Warranty Repair Service in the United States on SAMSUNG products  
purchased in Canada, and in Canada on SAMSUNG products  
purchased in the United States, for the warranty period originally  
speciꢀed, and to the Original Purchaser only.  
Add to Favorite/Delete from Favorite: Lets you add channels to  
and delete channels from your Favorites list.  
Address  
85 Challenger Road  
Ridgeꢀeld Park, NJ  
07660-2112  
ꢀts the entire screen.  
Balance L/R: Adjusts the balance between the right and left  
4
:3: Sets the picture to the old, 4:3 format and puts black or gray  
borders on the right and left of the picture.  
Do not watch your TV in the 4:3 format for  
Auto Program  
channels that appear when you press the CH button.  
* Favorite: Shows all favorite channels.  
Programmed: Shows all channels and programs currently  
scheduled using Timer Viewing.  
Added Channels: Shows all Added Channels. These are the  
To add channels to the Favorites list, follow these steps:  
Sharpness: Sharpens or dulls the edges of objects.  
100Hz  
Adjustment): Adjusts the loudness of speciꢀc bandwidth  
frequencies.  
/
300Hz  
/
1KHz  
/
3KHz  
/
10KHz (Bandwidth  
The Auto Program function memorizes all channels that are  
available over the air or through your cable system and adds them  
to the Channel List.  
Customer Care  
1-800-SAMSUNG(726-7864)  
Color: Adjusts the color saturation. The higher the Color setting,  
the more intense the color. Low settings remove color and the  
picture becomes black, white and gray.  
Tint: Adjusts the amount of green and red in the picture. As you  
increase the amount of green, the amount of red decreases and  
vice versa.  
a
long time.  
1. Select one or more channels in the All Channels/Added  
Channels list using the ▲/▼ buttons and the Yellow (Select)  
button on your remote.  
Center  
The above described warranty repairs must be performed by  
SAMSUNG Authorized Service Center. Along with this Statement, the  
Original Limited Warranty Statement and dated Bill of Sale as Proof  
of Purchase must be presented to the Service Center. Transportation  
to and from the Service Center is the responsibility of the purchaser.  
a
www.samsung.com/ca  
(English)  
Traces of borders displayed on the left, right and center of  
the screen may cause image retention (screen burn) which  
is not covered by the warranty.  
Reset: Resets the equalizer to its default settings.  
To start Auto Program, follow these steps:  
a
Web Site  
www.samsung.com/ca_fr  
(French)  
www.samsung.com/us  
2. Press the TOOLS button on your remote. The Tools menu  
appears.  
SRS TruSurround HD  
Available in Standard sound mode only.  
1. Push MENUm  
on your remote. The Antenna Source screen appears.  
Channel  
Auto Program  
ENTERE  
3. Select Add to Favorite in the Tools menu, and then press the  
ENTERE button.  
When the TV is connected to  
changes to Backlight, Contrast, Brightness, and  
a
PC, you can only make  
SRS TruSurround HD is a patented SRS technology that solves  
the problem of playing 5.1 multichannel content through two  
speakers. TruSurround delivers compelling, virtual surround  
2. On the Antenna Source screen, select the source of your TV  
signal.  
Sharpness.  
a
sound experience through any two-speaker playback system,  
including internal television speakers. It is fully compatible with all  
multichannel formats.  
BN68-04459A-01  
©
2012 Samsung Electronics Co., Ltd. All rights reserved.  
-
1
-
-
2
-
-
3
-
-
4
-
To delete channels from the Favorites list, follow these steps:  
Programmed List (on the Channel List Screen)  
The Programmed list displays the channels and programs you  
Select the channel, and then select Fine Tune.  
Timer 1 / Timer 2 / Timer 3  
Turns the TV on and off automatically at times and days you  
select. You can set three different on/off timer settings.  
The default PIN number of  
set your own PIN using the Change PIN function.  
a
new TV set is “0-0-0-0”. You can Caption  
(On-Screen Text Dialogue)  
No Signal Power Off (Off  
how quickly the TV switches to standby mode, if no picture is  
being received.  
/
15 min.  
/
30 min.  
/
60 min.): Sets  
Using the Media Play Menu  
1.  
Select one or more channels in the Favorite Channels list  
Fine tuned channels that have been saved are marked with  
an asterisk “*” on the right-hand side of the channel number  
in the channel banner.  
using the ▲/▼ buttons and the Yellow (Select) button on your have scheduled for viewing using the Time Viewing function. You  
How It Works  
Caption: You can switch the caption function on or off. If  
captions are not available, they will not be displayed on the  
screen.  
remote.  
can view, modify, or delete  
a
show you have scheduled using the  
Disabled when the PC is in power saving mode.  
Auto Power Off (Off On): The TV will be automatically turned  
off when no user operation is received for hours.  
Media Play  
You must set the clock first.  
When you access the Program Rating Lock Menu functions for  
the ꢀrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN  
screen closes and the Program Rating Lock Menu appears. Every  
time you access the Program Rating Lock functions, the PIN  
/
2
.
.
Press the TOOLS button on your remote. The Tools menu  
appears.  
functions on the Programmed List screen Tools menu.  
To reset fine-tuning, select the channel, select Fine Tune, and  
then select Reset on the Fine Tune screen.  
On Time / Off Time: Set the hour, minute, am/pm, and  
4
Programmed List Screen Tools Menu t  
Activate/Inactivate ꢀelds for the On Time and Off Time. Use the  
◄/► buttons to move from ꢀeld to ꢀeld. Use the ▲/▼ buttons  
to change the values in each ꢀeld. To activate the timer with  
the setting you have chosen, set the Activate/Inactivate ꢀeld to  
Activate.  
The Caption feature does not work in Component or  
HDMI mode.  
Videos  
3
Select Delete from Favorite in the Tools menu, and then  
press the ENTERE button.  
Change Info: Change the scheduling information for  
a
show or  
screen will appear and you must enter  
a
PIN.  
Support Menu  
Self Diagnosis  
channel you have scheduled.  
To change the information, follow these steps:  
Setup Menu  
Caption Mode: You can select the desired caption mode.  
Default CC1~CC4 Text1~Text4: (analog channels only) The  
Analog Caption function operates in either analog TV channel  
mode or when signal is supplied from an external device to the  
Timer Viewing: You can schedule  
automatically at set time, even when you are watching another  
channel. You must set the current time ꢀrst in the Setup Time  
Clock function to use Time Viewing.  
To schedule channel, follow these steps:  
a
channel to be displayed  
When the Rating Lock screen appears, select Program Rating  
Lock, and then press ENTERE. Select On, and then press the  
ENTERE key again. Depending on what type of programs or  
movies you want to block, select one of the options on the screen,  
and then press the ENTERE button. The options are listed below:  
a
Plug & Play  
Lets you re-run the Plug  
instructions, see your Quick Start Guide.  
/
/
>
1. Select the Programmed List icon on the left side of the  
Channel List screen, and then press the ENTERE button.  
2. On the Programmed List screen, select the show or channel  
entry you want to change, and then press the TOOLS button.  
The Tools Menu appears.  
Volume: Set the desired loudness.  
Picture Test: Use to check for picture problems. If the problem  
appears in the test picture, select Yes and follow the directions  
on the screen.  
Sound Test: Use the built-in melody sound to check for sound  
problems. If the problem occurs during the test, select Yes and  
follow the directions on the screen.  
Signal Strength: (Digital channels only) An HD channel’s  
reception quality is either perfect or the channels are unavailable.  
Adjust your antenna to increase signal strength.  
SUM  
Change Device  
E Enter R Return  
>
&
Play initial setup procedure. For  
Contents: To select what will be turned on when the timer  
setting is activated. You can set the TV to turn on a speciꢀc  
channel or play back contents such as photo or audio ꢀles.  
a
TV. (Depending on the broadcasting signal, the Analog Caption  
function may or may not work with digital channels.)  
a
To open Media Play in the Menu, follow these steps:  
1. Press the MENU button. Then, press the orbutton to  
1.  
2.  
3.  
Select  
buttons and the Yellow (Select) button on your remote.  
a
channel in the Added Channels list using the ▲/▼  
Language  
Set the menu language.  
TV Parental Guidelines: You can block TV programs based  
on their ratings. This function allows you to control what your  
children are watching.  
Default  
/
Service1~Service6  
/
CC1~CC4  
/
Text1~Text4:  
select Application on the left, and then press the ENTERE  
button.  
Use the ◄/► buttons to move to move to the Contents ꢀeld,  
3. Select Change Info, and then press the ENTERE button.  
The Time Viewing screen appears.  
anpdpetahre  
n. UprseessthteheE/►NTbEuRtEtonsbtuottmono.veThfreomCoꢀnetlednttos sꢀeclrde.eUnse  
(Digital channels only) The Digital Captions function works with  
digital channels.  
Press the TOOLS button on your remote. The Tools menu  
appears.  
Choose between English, Español, and Français.  
s
MPAA Rating: You can block movies based on their MPAA  
4. Use the ◄/► buttons to move from entry ꢀeld to entry ꢀeld  
and the ▲/▼ buttons to change the entries. Where numbers  
are displayed, you can also enter numbers directly using the  
number keypad on your remote.  
the ▲/▼ buttons to change the values in each ꢀeld.  
ratings. The Motion Picture Association of America (MPAA) has  
a rating system that provides parents or guardians  
with advanced information on which ꢀlms are appropriate for  
children.  
Service1~6 may not be available in digital caption mode  
depending on the broadcast.  
2. Press the or button to select Media Play (USB), and then  
press the ENTERE button.  
3. Press the or button to select an icon (Videos, Music,  
Select Time Viewing in the Tools menu, and then press the  
ENTERE button. The Time Viewing screen appears.  
Setting the Time  
-
TV/USB: Select TV or USB. The USB device must be  
connected to your TV before you can select USB.  
implemented  
Digital Caption Options: (Digital channels only)  
Reset: Reset all settings to the factory defaults.  
Timer Viewing  
Time  
The time you set will appear when you press the INFO  
button.  
-
-
-
Antenna: Displays the current antenna source, Air or Cable.  
Channel: If you have selected TV, select the desired channel.  
Music/Photo: If you have selected USB, follow these steps to  
select a folder containing MP3 (Music) or JPEG (Photo) ꢀles on  
the USB device:  
Size: Options include Default, Small, Standard and Large. The  
default is Standard.  
Font Style: Options include Default and Styles  
default is Style 0.  
FGorereegn,roBuluned, CYeollloowr:,OMpatgioennstainacnluddCeyDaenf.aYuoltu, Wcahnitec,hBalnagcek,thReed,  
color of the letters. The default is White.  
The PIN input screen appears before the setup screen.  
Enter your 4-digit PIN. Change the PIN using the Change  
PIN option.  
Photos, Settings), and then press the ENTERE button.  
Media Play might not work properly with unlicensed  
multimedia files.  
Antenna  
Channel  
Repeat  
Once  
5. Press the ENTERE button when done.  
Canadian English: You can block TV programs based on their  
Anglophone Canadian ratings.  
Canadian French: You can block TV programs based on their  
French Canadian ratings.  
0
to 7. The  
DTV Air  
6-1  
Cancel Schedules: Cancel  
a
show or channel you have  
Clock: Set the clock so you can use the various timer features  
Need-to-Know List before using Media Play (USB)  
scheduled.  
Date  
Start Time  
12 01 am  
To cancel  
a
scheduled show or channel, follow these steps:  
of the TV.  
Software Upgrade  
Software Upgrade can be performed by downloading the latest  
ꢀrmware from samsung.com to a USB memory device.  
x
x
The file system supports FAT16, FAT32 and NTFS.  
Certain types of USB Digital camera and audio devices may not  
be compatible with this TV.  
Icfloyocuk dagisacion.nnect the power cord, you have to set the  
Downloadable U.S. Rating: Parental restriction information can  
0
1-01-2012  
:
1. Select the Programmed List icon on the left side of the  
Channel List screen, and then press the ENTERE button.  
2. On the Programmed List screen, select the show or channel  
entry you want to cancel, and then press the TOOLS button.  
The Tools Menu appears.  
The maximum displayed number of files, including sub  
folders, in one folder of USB storage device is 2000.  
be used while watching DTV channels.  
L
Move  
U
Adjust  
E
Enter  
R
Return  
To set the clock, follow these steps:  
Locking/Blocking Programs or Movies  
You lock or block programs and/or movies in essentially the same  
way for each option. Each option displays  
tables have ratings listed on the left. The TV Parental Guidelines  
option also has kinds of content listed across the top: ALL: Lock all  
TV ratings.  
Background Color: Options include Default, White, Black, Red,  
Green, Blue, Yellow, Magenta and Cyan. You can change the  
background color of the captions. The default is Black.  
x
Media Play only supports USB Mass Storage Class (MSC)  
devices. MSC is a Mass Storage Class Bulk-Only Transport  
device. Examples of MSC are Flash Card Readers. Devices  
should be connected directly to the TV’s USB port. USB HDD is  
not supported.  
The media may not be playing smoothly when using the  
device lower than USB 2.0.  
4.  
Use the ◄/► buttons to move from entry ꢀeld to entry ꢀeld  
and the ▲/▼ buttons to change the entries. Where numbers  
are displayed, you can also enter numbers directly using the  
number keypad on your remote.  
1. Select Setup >Time Clock.  
>
a
grid or table. All the  
Foreground Opacity: This adjusts the opacity of text. Options  
HD Connection Guide  
Refer to this information when connecting external devices to the  
TV.  
2. Press ENTERE and select Auto or Manual, and then press  
ENTERE again.  
1. Use the ◄/► buttons to move to the ꢀeld under Music  
or the ꢀeld under Photo, and then press the ENTERE  
include Default, Transparent, Translucent, Solid and Flashing.  
3. Select Cancel Schedules, and then press the ENTERE  
button. The Cancel Schedule screen appears.  
button. The TV displays  
a
single folder (the Root folder)  
Background Opacity: This adjusts the opacity of the caption  
background. Options include Default, Transparent, Translucent,  
Solid and Flashing.  
x
x
Before connecting your device to the TV, please back up your  
files to prevent them from damage or loss of data. SAMSUNG is  
not responsible for any data file damage or data loss.  
A USB device that requires high power (more than 0.5A) may not  
be supported.  
If you selected Auto:  
/
FV: Fantasy violence  
/
V: Violence  
/
S: Sexual situation  
If you select Everyday or Every Week, the date you  
select in the Date field becomes the start date for your  
scheduled viewing. For Everyday, the TV will turn on  
every day, at the time you selected, starting from that  
date. For Everyweek, the TV will turn on every week,  
on the same day of the week as the start date you  
selected, at the time you selected, from that day on. If  
you select Once, the TV will turn on once, on the date  
and time you selected.  
and the type or name of the device.  
Contact Samsung  
4. Select OK, and then press the ENTERE button.  
The TV will automatically download the correct time from  
digital channel.  
a
2. Press the ENTERE button. A list of folders on the device  
appears.  
/
L: Adult Language  
/
D: Sexually Suggestive Dialog.  
To lock/block movies or shows with certain ratings and/or kinds of  
content, click the square next to the rating and/or under the kind of  
content.  
When you click  
locks. You can also Allow All or Lock All. When done, press the  
Return to Default: This option sets each Size, Font Style,  
Foreground Color, Background Color, Foreground Opacity and  
Background Opacity to its default.  
View this information when your TV does not work properly or  
when you want to upgrade the software. You can ꢀnd information  
regarding our call centers and how to download products and  
software.  
Information: Display the information for  
a
show or channel you  
have scheduled. You can also change the schedule Information.  
1. Select the Programmed List icon on the left side of the  
Channel List screen, and then press the ENTERE button.  
2. On the Programmed List screen, select the show or channel  
entry you want information for, and then press the TOOLS  
button. The Tools Menu appears.  
•ꢀ Select Time Zone, and then press the ENTERE button.  
Use the▲/▼ buttons to select your Time Zone, and then  
press ENTERE.  
•ꢀ Select DST (Daylight Savings Time), and then press  
ENTERE. Select On if you want to turn the DST  
adjustment on and off manually. Select Off to turn off the  
DST adjustment. Select Auto if you want the TV to adjust  
to DST automatically. Press ENTERE when done.  
If there are no folders on your device, press the  
x
x
Do not disconnect the USB device while it is loading.  
The higher the resolution of the image, the longer it takes to  
display on the screen.  
A
lock appears. To unlock/unblock, click the square again.  
a low rating, all the ratings above it will also display  
Yellow (Select) button to select the Root folder, and  
then press the RETURN button. The Timer screen  
re-appears.  
Digital Caption Options are available only when you can  
select Default and Service1 Service6 in Caption Mode.  
~
x
x
x
The maximum supported JPEG resolution is 15,360 x 8,704  
pixels.  
RETURN button on your remote.  
The Foreground and Background cannot be set to the  
same color.  
Media Play  
Enjoy photos, music and/or movie ꢀles saved on a  
USB Mass Storage Class (MSC) device.  
3. Use the ▲/▼ buttons to highlight  
music or photos, and then press the Yellow (Select)  
button to select the folder.  
a
folder that contains  
Change PIN: The Change PIN screen will appear. Choose any  
digits for your PIN and enter them in Enter New PIN ꢀelds.  
Re-enter the same  
digits in Conꢀrm New PIN ꢀelds. When the Melody  
If  
“Not Supported File Format” message appears.  
The TV cannot play MP3 files with DRM that have been  
downloaded from for-pay site. Digital Rights Management  
(DRM) is technology that supports the creation, distribution,  
a ꢀle is corrupted or the TV does not support the ꢀle type, the  
5.  
Press the ENTERE button on your remote when done.  
4
3.  
Select Information, and then press the ENTERE button.  
The Time Viewing Information screen appears.  
4
MEDIA.P  
Only Added Channels can be scheduled.  
a
DST and Time Zone function are only available when  
the Clock Mode is set to Auto.  
4. Press the RETURN button. The Timer screen re-appears.  
Change PIN screen disappears, press the OK button. The TV  
has memorized your new PIN.  
Set so that  
a
melody plays when the TV is turned on or off.  
a
Scheduled programs and channels are displayed in the  
Programmed List.  
4. Select Change Info and press the ENTERE button to  
change information, or select Close and press the ENTERE  
button to close the Information screen.  
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,  
Sat~Sun or Manual. If you select Manual, you can select the  
days you want to activate the timer by using the ◄/► buttons  
to highlight the day, and then pressing the ENTERE button.  
The Melody does not play:  
and management of digital content in an integrated and  
comprehensive way, including protecting the rights and interests  
of content providers, preventing illegal copying of contents, and  
managing billing and settlements.  
If you selected Manual:  
If you forget the PIN, press the remote-control buttons in  
the following sequence, which resets the pin to “0-0-0-0”  
x
x
x
When you select  
view the digital program list. If you highlight  
a
digital channel, press the  
a
program in  
button to  
The Clock Set screen appears. Use the ▲/▼ buttons to  
change the values in each ꢀeld or use the number buttons to  
enter the values directly. Use the ◄/► buttons to move from  
ꢀeld to ꢀeld. When done with all the ꢀelds, press ENTERE.  
:
button has been pressed.  
Connecting a USB Device  
1. Turn on your TV.  
Select All  
/
Deselect All: You can select or deselect all channels  
POWER (off)  
MUTE  
8
2
4
POWER (on)  
x
x
PTP devices are not supported.  
If the device is over-powered while connecting or using a USB  
device, the device may not be recognized or may malfunction.  
the list, and then press the ENTERE(Schedule) button,  
you set Timer Viewing for that program directly.  
in the channel list.  
To unselect  
button.  
a
day, highlight it, and then press the ENTERE  
Game Mode  
button.  
Worh  
ebnoyxo™u tcoonyonuecr tTaV,gyaomuecacnonesnojoleysaumchoaresraeaPlilsatyicStgaatimonin™g  
2. Connect USB device containing photo, music, and/or movie  
a
ꢀles to the USB jack on the back of the TV.  
appears.  
A
pop up window  
Select All: Select all the channels in the displayed channel list.  
Deselect All: Deselect all the selected displayed channels.  
Other Channel Menu Functions  
Available only when Clock Mode is set to Manual.  
When you ꢀnished making all your selections on the Timer screen,  
press either the ENTERE or RETURN button.  
X
x
x
x
x
If the TV has no input during the time period set in Auto  
Protection Time, the Screensaver will run.  
The power-saving mode of some external hard disk drives may  
be released automatically when your connect them to the TV.  
Auto Protection Time  
Auto Protection Time (Off  
hours): If the screen remains idle with  
Channel Mode (Added Channels / Favorite  
Channels)  
Sleep Timer t  
experience by turning on the Game Mode function.  
/
2
hours  
/
a
4
still image for  
hours  
/
8
hours  
/ 10  
3. Press the MEDIA.P button on your remote. The Media Play  
You can only select Deselect All when one or more  
channels are selected.  
Precautions and limitations for game mode:  
Automatically shuts off the TV after  
a
preset period of time. (30,  
Other Features  
a
certain  
menu appears.  
Channel Name Edit: Analog channels only. Lets you assign  
a
60, 90, 120, 150 and 180 minutes).  
x
Bexetfeorrneayloduevdicisec,o  
s
n
e
nteGcat mthee gMaomdeectonOsfofleinatnhde csoentu  
npecmteannuo.ther  
pth  
e
eriofodrmofattiimoneoyfoguhdoesꢀtnime,atgheessocnretehnessacvreer nis. activated to prevent  
IUf SyoBud  
u
e
sveicaeUorSmBaeyxtneontsbio  
e
na  
c
balebleto, trheeadTVthme aꢀlyesnootnrethceogdneivzieceth. e  
name of up to ꢀve characters to an analog channel. For example, Lets you select the channel list displayed when you press the  
Program Rating Lock  
The Program Rating Lock feature lets you block programs  
you've determined are inappropriate for your children based on  
the program's ratings. To access the Program Rating Lock  
<CH> (Channel) button on your remote. For example, if you  
select Favorite Channels, you will only see Favorite channels when  
you press the <CH> button.  
To cancel the Sleep Timer, select Off.  
x
If you display the TV menu in Game Mode, the screen shakes  
slightly.  
If  
a USB device connected to the TV is not recognized, the list of  
ꢀle in the list is not played,  
PC, format the device, and check  
Hist, Food, Golf, etc. This makes it easier to ꢀnd and select  
channel  
a
Eco Solution  
ꢀles on the device is corrupted, or a  
.
Game Mode is not available when the input source is set to  
TV.  
Energy Saving (Off  
/
Low  
/
Medium  
/
High  
/
Picture Off)  
:
connect the USB device to a  
the connection.  
Auto Program: See Auto Program under Memorizing Channels.  
This adjust the brightness of the TV in order to reduce power  
consumption. If you select Picture Off, the screen is turned  
off, but the sound remains on. Press any button except volume  
button to turn on the screen.  
Fine Tune  
Analog channels only.  
feature and make any changes, you must enter  
a
PIN (personal  
After connecting the game console, set Game Mode to On.  
You may notice slightly reduced picture quality.  
x
If a ꢀle you deleted from the PC is still found when you run Media  
Play, use the “Empty the Recycle Bin” function on the PC to  
identiꢀcation number). To watch  
enter the same PIN.  
a
blocked program, you must also  
If the reception is clear, you do not have to ꢀne tune the channel, as  
this is done automatically during the search and store operation. If  
the signal is weak or distorted, ꢀne tune the channel manually.  
x
x
Photos only supports the sequential jpeg format.  
The Videos option does not support the scene search and  
thumbnail functions.  
Program Rating Lock is not available in HDMI or  
Component mode.  
-
5
-
-
6
-
-
7
-
-
8
-
[
UE4003-ZA]BN68-04459A-01ENG.indd  
1
2013-07-29 �� 9:00:09  

In addition to the user manual Samsung LED LCD TV UN32EH4003FXZA, we also provide a support panel to help you solve your problems with Samsung LED LCD TV UN32EH4003FXZA. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung LED LCD TV UN32EH4003FXZA. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung LED LCD TV UN32EH4003FXZA - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.