User manual Samsung LN40C650

If you found this page, you probably have a problem and you need a user manual for the device Samsung LN40C650. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung LN40C650 it belongs to the category Flat Panel Television. A user manualSamsung LN40C650 is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung LN40C650 directly. You can view the user manualSamsung LN40C650 directly online or save and store it on your computer.

Quick Setup Guide  
Connecting an audio device (Home Theater, etc.)  
Step 4: Connect External Devices  
Congratulations on the purchase of your new Samsung TV.  
Read this setup guide to get your TV up and running quickly.  
Connect your TV to your Home Theater or other  
audio device to enjoy enhanced Sound quality.  
Analog Audio connection  
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)  
Using an Audio Cable  
1
-800-SAMSUNG (1-800-726-7864)  
Samsung Electronics America, Inc.  
05 Challenger Road Ridgeꢀeld Park, NJ 07660-0511  
STOP  
Please do not return this unit.  
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.  
Ampliꢀer / DVD home theater  
1
Samsung Electronics Canada Inc.  
55 Standish Court Mississauga, Ontario L5R 4B2  
Call Center hours of operation: Mon-Sun, 9:00 AM -12  
AM EST.  
To register this product, visit: www.samsung.com/  
register.  
AUDIO IN  
If you have problems operating your  
TV, call:  
Best Connection  
Audio (Not Supplied)  
HD connection (up to 1080p)  
1
-800-SAMSUNG (1-800-726-7864)  
For web support please visit:  
www.samsung.com/support  
Digital Audio connection  
Using an HDMI Cable  
Using an Optical Cable  
DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box)  
satellite receiver  
HDMI Cable (Not Supplied)  
Digital Audio System  
HDMI OUT  
DVD  
Optical Cable (Not Supplied)  
OPTICAL  
Step 1: Install the Stand  
Very Good Connection  
Follow the steps below to connect the TV to the stand.  
HD connection (up to 1080p)  
HDMI to DVI Cable (Not Supplied)  
NOTE  
Using an HDMI to DVI Cable  
Connecting a PC  
x
Make sure to distinguish between the front and back of the Stand and  
Guide Stand when assembling them.  
Connect your TV to a PC to use it as  
a Monitor.  
HD connection  
DVI OUT  
AUDIO OUT  
Device  
Using an HDMI to DVI Cable  
x
x
Make sure that at least two persons lift and move the LCD TV.  
Audio (Not Supplied)  
AUDIO OUT  
Stand the product up to fasten the screws. If you fasten the screws with  
the LCD TV placed down, it may lean to one side.  
Audio Cable (Not Supplied)  
HDMI to DVI Cable (Not Supplied)  
DVI OUT  
Good Connection  
Top view  
Video Cable (Not Supplied)  
Screws (M4 X L12)  
Audio Cable  
Not Supplied)  
Component connection (up to 1080p)  
(
Component Cable (Not Supplied)  
Guide Stand  
Stand  
Using a Component Cable  
Lowest Quality Connection  
DVD, Blu-ray player, cable box, STB satellite receiver, VCR  
Front  
Audio/Video connection (480i only)  
1
2
Connect the Guide Stand to the  
Stand using ꢀve screws (M4 X L12)  
as shown.  
Audio Cable (Not Supplied)  
COMPONENT OUT  
AUDIO OUT  
Blu-ray player  
Using an D-Sub Cable  
Using an Audio/Video Cable  
PC OUT  
Rear  
DVD, Blu-ray player, cable box, STB satellite receiver, VCR  
VCR  
VIDEO OUT AUDIO OUT  
Rear  
D-Sub Cable (Not Supplied)  
Audio Cable (Not Supplied)  
When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the  
AV IN 1 label. The jack will not match the color of the video cable (yellow).  
AUDIO OUT  
With your TV upright, connect the  
TV to the Stand as shown.  
3
Fasten two screws (M4 X L12) at  
position 1, and then fasten the  
two screws (M4 X L2) at position  
2
.
Changing the Picture Mode  
Step 5: Run Plug & Play  
6
Select the daylight savings time setting: Off or On, and then press the  
ENTERE button.  
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &  
Play function. With Plug & Play, you can select the On Screen Display language, set  
the clock mode, and launch the TV’s channel memorizing process.  
Your TV has four preset Picture Modes with factory adjusted settings, each  
designed to give you an excellent picture under speciꢀc conditions.  
The Picture Modes are listed and described in the table below:  
2
7
8
Select the time zone in which you live, and then press the ENTERE button.  
It also displays connection instructions similar to those in this guide.  
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow  
buttons on your remote. To make a selection, press the ENTERE button.  
To skip a screen, press the MENU button. To turn on your TV, press the POWER  
Mode  
Rear  
After the time zone screen, The connection method for best HD screen  
quality is displayed. Press Right arrow button on your remote to view each  
screen in succession. Press the Blue button to skip this section.  
Description  
1
Dynamic  
Brightens picture. For a vibrant, enhanced image in brightly lit or  
sunny room.  
Standard  
Natural  
For a bright, detailed picture in a normally lit room.  
button on the remote or on the TV. To run Plug & Play, follow these steps:  
9
Changing the Screen Size  
The Enjoy your TV. screen appears. Then press the ENTERE button.  
For a comfortable, easy-on-the-eyes picture in a normally lit room.  
For a studio quality cinema picture in a dimly lit or dark room.  
Step 2: Install the Batteries into the Remote  
1
2
3
Using your remote control,  
Plug & Play  
Movie  
To install batteries into your remote  
control, follow these steps:  
Lift the cover on the back of the  
remote upward as shown in the ꢀgure  
to the right.  
select the language for the On  
Screen Display (OSD), and then  
press the ENTERE button.  
Select Language of the OSD.  
English  
Español  
Français  
Your TV has several screen size options, each designed to work best with speciꢀc  
types of video input. If you have a cable box or satellite receiver, it may have its own  
set of screen sizes as well.  
To change the screen size, press the P.SIZE button on your remote. The ꢀrst time  
you press it, your TV displays the current setting. Thereafter, each time you press  
the P.SIZE button, you change the size of the picture on the screen.  
To change the Picture Mode, follow these steps:  
1. Turn on your TV, press the TOOLS button on your remote.  
The Tools menu appears.  
1
.
Menu Language  
:
Select Home Use, and then  
press the ENTERE button.  
If you select Store Demo, the TV will reset your picture and audio settings  
U Move E Enter  
2. Using the or on your remote, select Picture Mode.  
2
.
Install two AAA batteries.  
3. On the Picture Mode menu, use the or on your remote to select the  
Picture Mode you want.  
Make sure to match the + and -  
every 30 minutes.  
ends of the batteries to the diagram in the battery compartment.  
The following sizes are available:  
4
.
Press the EXIT button to exit the menu.  
3
.
Replace the cover.  
Select Antenna Source and Channel Source. If Antenna Source is  
Cable or Auto, you must select Channel Source to same type as your  
cable system type. After selecting source, select Search; then press the  
ENTERE button on your remote.  
Setting the Clock  
Step 3: Connect Power and Antenna or Cable  
Before you can use your TV’s On/Off Timer, you must set the clock. To set the  
clock, follow these steps:  
1. Turn on your TV, press the MENU button on your remote, then select Setup →  
Time.  
Most cable systems are Standard(STD) systems, If you are not sure  
about what kind of cable system you have, contact your cable company.  
16:9 Wide screen  
4:3 Standard screen  
Wide Fit  
VHF/UHF Antenna  
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.  
After Plug & Play is complete, set your TV to Channel 3 or 4, according  
to the directions for your cable or satellite box.  
Connect Ant In to  
2. Select Clock Mode, and then press the ENTERE button.  
3. Choose Auto or Manual.  
Antenna Cable (Not Supplied)  
or  
Wall cable jack  
VHF/UHF Antenna  
Cable or Satellite box  
Ant or Cable Out  
Zoom 1  
Zoom 2  
Screen Fit  
4
5
The TV memorizes the available channels. This process can take up to 45  
minutes.  
x
x
If you select Auto, the current time will be set automatically using the time  
from a digital channel.  
Screen Fit: Displays the full image without any cut-off when HDMI (720p /  
080i / 1080p) or Component (1080i / 1080p) signals are inputted.  
Use a 75 ohm (round) cable.  
If you select Manual, you can set the Month, Day, Year, Hour, Minute  
and am/pm directly by pressing up, down, left and right arrow button on  
your remote.  
1
After the TV has memorized the channels, choose the Clock Mode. Select  
Auto if you have a digital channel in your area. Select Manual if you don’t, or  
if you have a cable or satellite box. When done, press the ENTERE button.  
Make sure the AC power cord is plugged in securely to  
the wall outlet and the TV.  
4
.
Press the RETURN button on your remote when done.  
If you select Manual, the clock setting screen appears.  
[
QSG]BN68-02616A-00Eng.indd  
1
2010-02-02 오후 8:27:44  

In addition to the user manual Samsung LN40C650, we also provide a support panel to help you solve your problems with Samsung LN40C650. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung LN40C650. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung LN40C650 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.