User manual Samsung LN46A950D1F

If you found this page, you probably have a problem and you need a user manual for the device Samsung LN46A950D1F. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung LN46A950D1F it belongs to the category Flat Panel Television. A user manualSamsung LN46A950D1F is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung LN46A950D1F directly. You can view the user manualSamsung LN46A950D1F directly online or save and store it on your computer.

Connections  
Connecting VHF and UHF Antennas  
If your antenna has a set of leads that look like the diagram to the right, see “Antennas  
with 300 Ω Flat Twin Leads” below.  
If your antenna has one lead that looks like the diagram to the right, see “Antennas with  
75 Ω Round Leads”.  
If you have two antennas, see “Separate VHF and UHF Antennas”.  
Antennasꢀwithꢀ300ꢀΩꢀFlatꢀTwinꢀLeads  
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300  
Ω twin flat leads, follow the directions below.  
1
.
Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not  
supplied). Use a screwdriver to tighten the screws.  
ANT IN  
2
.
Plug the adaptor into the ANT IN terminal on the back of the TV.  
Antennasꢀwithꢀ75ꢀΩꢀRoundꢀLeads  
Plug the antenna lead into the ANT IN terminal on the back of the TV.  
ANT IN  
1
.
Separate VHF and UHF Antennas  
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before  
connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics  
shops).  
1
.
Connect both antenna leads to the combiner.  
UHF  
VHF  
2
.
Plug the combiner into the ANT IN terminal on the bottom of the rear panel.  
ANT IN  
UHF  
VHF  
Connecting Cable TV  
To connect to a cable TV system, follow the instructions below.  
Cable without a Cable Box  
1
.
Plug the incoming cable into the ANT IN terminal on the back of the TV.  
ANT IN  
Because this TV is cable-ready, you do not need a cable box to view  
unscrambled cable channels.  
Connecting to a Cable Box that Descrambles All Channels  
1
2
.
.
Find the cable that is connected to the ANT OUT terminal on your cable box.  
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.  
ANT IN  
ANT OUT  
Connect the other end of this cable to the ANT IN terminal on the back of the TV.  
ANT IN  
English - 9  
0
1689A-01Eng.indb  
9
2008-08-06 �� 1:37:29  

In addition to the user manual Samsung LN46A950D1F, we also provide a support panel to help you solve your problems with Samsung LN46A950D1F. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung LN46A950D1F. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung LN46A950D1F - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.