User manual Samsung LN46A950D1F

If you found this page, you probably have a problem and you need a user manual for the device Samsung LN46A950D1F. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung LN46A950D1F it belongs to the category Flat Panel Television. A user manualSamsung LN46A950D1F is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung LN46A950D1F directly. You can view the user manualSamsung LN46A950D1F directly online or save and store it on your computer.

Connecting to a Cable Box that Descrambles Some Channels  
If your cable box descrambles only some  
channels (such as premium channels),  
follow the instructions below. You will need  
a two-way splitter, an RF (A/B) switch and  
four lengths of RF cable. (These items are  
available at most electronics stores.)  
ANT IN  
1
.
Find and disconnect the cable that is  
connected to the ANT IN terminal on  
your cable box.  
Incoming  
cable  
This terminal might be labeled  
“ANT IN”, “VHF IN” or simply, “IN”.  
Splitter  
2
3
.
.
Connect this cable to a two-way  
splitter.  
Incoming  
cable  
Splitter  
Cable Box  
Connect an RF cable between the  
OUTPUT terminal on the splitter and  
the IN terminal on the cable box.  
Incoming  
cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
4
5
6
.
.
.
Connect an RF cable between the  
ANT OUT terminal on the cable box  
and the B–IN terminal on the RF(A/B)  
switch.  
Incoming  
cable  
Splitter  
RF (A/B)  
Switch  
Cable Box  
Connect another cable between the  
other OUT terminal on the splitter and  
the A–IN terminal on the RF (A/B)  
switch.  
ANT IN  
Incoming  
cable  
TV Rear  
Splitter  
RF (A/B)  
Switch  
Cable Box  
Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the  
TV.  
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”  
position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s  
output channel, which is usually channel 3 or 4.)  
English - 10  
0
1689A-01Eng.indb 10  
2008-08-06 �� 1:37:30  

In addition to the user manual Samsung LN46A950D1F, we also provide a support panel to help you solve your problems with Samsung LN46A950D1F. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung LN46A950D1F. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung LN46A950D1F - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.