If you found this page, you probably have a problem and you need a user manual for the device Samsung P88000. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung P88000 it belongs to the category Flat Panel Television. A user manualSamsung P88000 is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung P88000 directly. You can view the user manualSamsung P88000 directly online or save and store it on your computer.
Quick Setup Guide
Connecting an audio device (Home Theater, etc.)
Step 4: Connect External Devices
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
Connect your TV to your Home Theater or other
audio device to enjoy enhanced Sound quality.
Analog Audio connection
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Using an Audio Cable
1
-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
5 Challenger Road Ridgeꢀeld Park, NJ 07660-2112
STOP
Use one of the connections below to connect your
TV to an external A/V device.
We recommend using HDMI for the highest picture
quality.
Ampliꢀer / DVD home theater
8
Best Connection
Please do not return this unit.
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
AUDIO IN
If you have problems operating your
TV, call:
HD connection (up to 1080p)
1
-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
Using an HDMI Cable
Audio Cable (Not Supplied)
✎
When connecting to AV IN, the color of the
AV IN [Y/VIDEO] jack (green) will not match the
video cable (yellow).
HDMI Cable (Not Supplied)
Digital Audio connection
HDMI OUT
DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box) satellite
receiver
Using an Optical Cable
Digital Audio System
Device
Optical Cable (Not Supplied)
OPTICAL
Step 1: Install the Stand
Very Good Connection
Follow the steps below to connect the TV to the stand. (50 inch model only)
HD connection (up to 1080p)
✎
NOTE
HDMI to DVI Cable (Not Supplied)
Using an HDMI to DVI Cable
Connecting a PC
x
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
Connect your TV to a PC to use it as a Monitor.
DVI OUT
x
x
Make sure that at least two persons lift and move the PDP TV.
HDMI to DVI Cable
(Not Supplied)
HD connection
Device
AUDIO OUT
Stand the product up and fasten the screws. If you fasten the screws with
the PDP TV placed down, it may lean to one side.
Using an HDMI to DVI Cable
DVI OUT
Audio Cable (Not Supplied)
Top view
Screws (M4 X L12)
AUDIO OUT
s
s
Lowest Quality Connection
Good Connection
Guide Stand
Stand
s
s
s
Audio/Video connection (480i only)
Component connection (up to 1080p)
Audio Cable (Not Supplied)
Front
Rear
Audio Cable (Not Supplied)
Video Cable (Not Supplied)
Using an Audio/Video Cable
Component Cable (Not Supplied)
Audio Cable (Not Supplied)
Using a Component Cable
1
2
ꢀ
Connect the Guide Stand to the
AUDIO OUT
VIDEO OUT
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Audio Cable (Not Supplied)
Using a D-Sub Cable
COMPONENT OUT
Stand using ꢀve screws (M4 X L12)
as shown.
AUDIO OUT
Rear
Device
Device
D-Sub Cable (Not Supplied)
PC OUT
AUDIO OUT
ꢀ
TWVithtoytohuerSTtVanudp.right, connect the 3ꢀ Fpaosstiteionntw1o,sacnrdewthse(nMf4asXteLn10th)raete
screws (M4 X L10) at position 2.
Changing the Picture Mode
Step 5: Run Plug & Play
6ꢀ ESNeleTcEtRthEe Dbauytlitgohnt.savings time setting: Off or On, and then press the
Screws (M4 X L10)
2
When you turn on your TV for the ꢀrst time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV’s channel memorizing process.
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under speciꢀc conditions.
The Picture Modes are listed and described in the table below:
s
s
s
s
s
s
s
7ꢀ Select the time zone in which you live, and then press the ENTERE button.
s
s
s
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTERE button.
To skip a screen, press the MENU button. To turn on your TV, press the POWER
Mode
8
ꢀ
After the time zone screen, The connection method for best HD screen
quality is displayed. Press the Right arrow button on your remote to view
each screen in succession. Press the Blue button to skip this section.
Description
Rear
1
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard
Relax
For a bright, detailed picture in a normally lit room.
button on the remote or on the TV. To run Plug & Play, follow these steps:
9ꢀ The Enjoy your TV. screen appears. Then press the ENTERE button.
For a comfortable, easy-on-the-eyes picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
Selects a custom calibrated picture for lights off theater experience.
Selects a custom calibrated picture for daylight viewing.
Step 2: Install the Batteries into the Remote
1
ꢀ
Using your remote control,
Plug & Play
Movie
Changing the Screen Size
To install batteries into your remote control,
follow these steps:
select the language for the On
Screen Display (OSD), and then
press the ENTERE button.
CAL-NIGHT
CAL-DAY
Select Language of the OSD.
English
Español
Français
Your TV has several screen size options, each designed to work best with speciꢀc
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The ꢀrst time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
1
.
Lift the cover on the back of the remote
upward as shown in the ꢀgure to the
right.
Menu Language
:
To change the Picture Mode, follow these steps:
1. Turn on your TV, press the TOOLS button on your remote.
The Tools menu appears.
2ꢀ SpreelescstthHeomENeTUEsReE, anbdutthtoenn.
If you select Store Demo, the TV will reset your picture and audio settings
U Move E Enter
2
.
Install two AAA batteries.
✎
Make sure to match the + and -
ends of the batteries to the diagram in the battery compartment.
Replace the cover.
2. Using the ▲ or ▼ on your remote, select Picture Mode.
every 30 minutes.
The following sizes are available:
3
.
On the Picture Mode menu, use the ◄ or ► button on your remote to select
the Picture Mode you want.
3
.
3ꢀ SCealbeclet AornAteuntnoa, ySoouumrcuestasnedleCcht aCnhnaenlnSeoluSrocuer.cIfeAtontseanmnae Styopueracseyisour
cable system type. After selecting source, select Search; then press the
ENTERE button on your remote.
4.
Press the EXIT button to exit the menu.
Step 3: Connect Power and Antenna or Cable
Setting the Clock
✎
Most cable systems are Standard (STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
16:9 Widescreen
4:3 Standard screen
Wide Fit
VHF/UHF Antenna
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV, press the MENU button on your remote, then select Setup →
Time.
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
Antenna Cable
Connect Ant In to
(Not Supplied)
•
•
•
Wall cable jack
Zoom 1
Zoom 2
Screen Fit
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
VHF/UHF Antenna
Cable or Satellite box
Ant or Cable Out
4
5
ꢀ
ꢀ
The TV memorizes the available channels. This process can take up to 45
minutes.
or
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
x
x
If you select Auto, the current time will be set automatically using the time
from a digital channel.
Use a 75 ohm (round) cable.
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
if you have a cable or satellite box. When done, press the ENTERE button.
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
✎
If you select Manual, the clock setting screen appears.
4
.
Press the RETURN button on your remote when done.
[
QSG]BN68-02619A-02Eng.indd
1
2010-09-03 오후 5:59:05
In addition to the user manual Samsung P88000, we also provide a support panel to help you solve your problems with Samsung P88000. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung P88000. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung P88000 - you will surely help many users by doing so.
Have you got problems with your device? Ask a question - our users can help you