User manual Crimestopper Security Products CS-2012DPII-TW1

If you found this page, you probably have a problem and you need a user manual for the device Crimestopper Security Products CS-2012DPII-TW1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Crimestopper Security Products CS-2012DPII-TW1 it belongs to the category Automobile Electronics. A user manualCrimestopper Security Products CS-2012DPII-TW1 is taken from the manufacturer, a Crimestopper Security Products company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Crimestopper Security Products CS-2012DPII-TW1 directly. You can view the user manualCrimestopper Security Products CS-2012DPII-TW1 directly online or save and store it on your computer.

OPERATING INSTRUCTIONS - ALARM  
Active Arming / Locking:  
Press and release button #1 (Lock symbol) on the transmitter. The system will arm and confirm with one siren  
chirp, one light flash, and the LED will begin to flash. Power locks will lock (if equipped). Starter disable circuit  
will turn on. After a short delay to allow the vehicle and electronics to settle, the system is completely armed.  
Disarming: / Unlocking  
Press and release button #2 (Unlock symbol) on the transmitter. System will disarm and confirm with two  
siren chirps, two light flashes, and the LED will turn off. Power locks will Unlock and Interior Dome light will  
turn on (if installed with these optional features)  
Disarming While Tripped (Triggered):  
Disarming the System while it is triggering requires TWO presses of the #2 Unlock Button. The first press of  
Button #2 Resets the alarm cycle only (system still armed) while a second press will disarm/unlock the system.  
Silent Arming/Disarming (On demand):  
To Arm or Disarm the system without siren chirps, press and release both Buttons #2 (Unlock) and #4 (Start)  
at the same time. System will Arm or Disarm without siren chirps that one time. Flashing lights and LED will  
be the only indicators of Arm/Disarm status. If the system was tripped while you were away, 4 chirps will be  
heard to notify you that the system was tripped.  
Silent Arming/Disarming (Chirp Defeat):  
This system can be programmed to silent arm and disarm using the normal lock and unlock buttons. Flashing  
lights and LED will be the only indicators of armed or disarm status. Check with your installer or follow  
programming option instructions in the installation manual.  
Remote Panic Protection  
To sound the alarm in an emergency situation or to draw attention to your vehicle, press and hold Button #1  
(Lock) for at least 3 seconds until the siren sounds. Press Button #2 (Unlock) to reset panic mode.  
Driver’s Priority / Split Unlock (Optional)  
When using the optional separate driver’s and passenger unlock function, press and release button #2  
(Unlock symbol) on the transmitter to unlock driver’s door only, then press the #2 button again within 2-4  
seconds to unlock remaining doors. This feature is optional and requires additional parts and/or labor.  
Arming With Shock Sensor Bypass  
To arm the alarm and bypass shock sensor protection, press Button #1 as normal then press and release  
Button #1 and #2 together within 2 seconds. You will hear 3 extra siren chirps indicating shock sensor bypass  
for this arming cycle only.  
6

In addition to the user manual Crimestopper Security Products CS-2012DPII-TW1, we also provide a support panel to help you solve your problems with Crimestopper Security Products CS-2012DPII-TW1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Crimestopper Security Products CS-2012DPII-TW1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Crimestopper Security Products CS-2012DPII-TW1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.