¦ Economical Solutions
analog channels only)
The Eco Function can be used to enhance your power
Ifthe reception is clear, you do not have to ꢀne tune the
channel, as this is done automatically during the search and
store operation. Ifthe signal is weak or distorted, ꢀne tune
the channel manually. Scroll to the left or right until the image
MENUm → Picture → Eco Solution → ENTERE
Settings are applied to the channel you're currently
Energy Saving (Off / Low / Medium / High / Picture
Off): This adjusts the brightness ofthe TV in order to
reduce power consumption. Ifyou select Picture Off,
the screen is turned off, but the sound remains on.
Press any button except the volume button to turn on
the screen. Until the screen turns on again, a distorted
picture will be displayed for about 4 seconds.
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side ofthe
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
Changing the Preset Picture Mode
Ifyou adjusts the Cell Light, the Eco Sensor will
be set to Off.
MENUm → Picture → Mode → ENTERE
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
IfEco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
Select your preferred picture type.
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
Relax: Suitable for reducing eye strain.
No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on ifit's not
receiving a signal.
Relax is not available in PC mode.
Disabled when the PC is in power saving mode.
Movie: Suitable for watching movies in a dark room.
Changing the Picture Options
Adjusting Picture Settings
MENUm → Picture → ENTERE
MENUm → Picture → Advanced Settings →
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Advanced Settings are available in Standard / Movie mode)
Your television has several setting options for picture quality
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
In PC mode, you can only make changes to Cell
Light, Contrast and Brightness.
Settings can be adjusted and stored for each
external device connected to the TV.
RGB Only Mode
2010-06-24 오후 4:48:23