User manual Samsung AD19A1(B1)E07

If you found this page, you probably have a problem and you need a user manual for the device Samsung AD19A1(B1)E07. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung AD19A1(B1)E07 it belongs to the category Air Conditioner. A user manualSamsung AD19A1(B1)E07 is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung AD19A1(B1)E07 directly. You can view the user manualSamsung AD19A1(B1)E07 directly online or save and store it on your computer.

Heating Your Room  
You m ust select the Heat m ode if you w ish to adjust the:  
Heating tem perature  
Fan speed w hen heating  
1
If necessary, press the  
(On/Off) button.  
Result: The OPERATION indicator on the indoor unit comes on.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
R
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
IMPORTANT  
Plugged in  
Stopped  
It will start up normally after a three-minute.  
2
If the  
press the  
appears.  
indication is not displayed at the top of the remote control,  
button on the remote control one or more times until it  
Result: The indoor unit beeps each time you press  
The air conditioner starts up in Heat mode.  
.
NNoottee You can change modes at any time.  
R
3
To adjust the temperature, press the  
times until the required temperature is displayed.  
Possible temperatures are between 16°C and 30°C inclusive.  
Result: Each time you press or  
or  
buttons one or more  
:
-
-
The temperature is adjusted by 1°C  
The indoor unit beeps  
The air conditioner starts heating, provided that the room  
temperature is lower than the desired temperature  
R
(selected temperature+3°C); the fan will, however, operate.  
4
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Low  
Medium  
High  
Automatic  
Result: Each time you press  
, the indoor unit beeps.  
For the first three to five minutes, the fan operates very  
slowly until the air has been sufficiently warmed. Once the  
correct temperature has been reached, the fan is  
automatically set to the required speed.  
5
To control the direction of the air flow, refer to page 15.  
E-11  

In addition to the user manual Samsung AD19A1(B1)E07, we also provide a support panel to help you solve your problems with Samsung AD19A1(B1)E07. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung AD19A1(B1)E07. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung AD19A1(B1)E07 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.