User manual Samsung AQ12SBGE

If you found this page, you probably have a problem and you need a user manual for the device Samsung AQ12SBGE. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung AQ12SBGE it belongs to the category Air Conditioner. A user manualSamsung AQ12SBGE is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung AQ12SBGE directly. You can view the user manualSamsung AQ12SBGE directly online or save and store it on your computer.

Heating Your Room  
You must select the Heat mode if you wish to adjust the:  
Heating temperature  
Fan speed when heating  
If necessary, press the  
(On/Off) button.  
Result: The operation indicator on the indoor unit lights up.  
The air conditioner starts up in the mode selected when  
the unit was last used.  
The indoor unit beeps.  
The air conditioner is fitted with a protection mechanism  
to prevent the unit from being damaged when it is started  
immediately after being:  
Plugged in  
It will start up normally after three minutes.  
If the  
is not displayed at the top of the remote control, press the  
button on the remote control one or more times until it appears.  
Result: The indoor unit beeps each time you press the  
The air conditioner runs in HEAT mode.  
You can change modes at any time.  
To adjust the temperature, press the  
button one or more times  
until the required temperature is displayed.  
Possible temperatures are between 16°C and 30°C inclusive.  
Result: Each time you press the button:  
The temperature is adjusted by 1°C  
The indoor unit beeps  
The air conditioner starts heating, provided that the room  
temperature is lower than the desired temperature  
(selected temperature+3°C).  
If the room temperature reaches the set temperature, the air  
conditioner stops heating, but the fan is still operating.  
Select the fan speed by pressing the  
until the required setting is displayed:  
button one or more times  
Automatic (rotated :  
Result: Each time you press the  
button, the indoor unit beeps.  
For the first three to five minutes, the fan operates very  
slowly until the air has been sufficiently warmed. Once the  
correct temperature has been reached, the fan is automatically  
set to the required speed.  
To control the direction of the air flow, refer to pages 16 and 17.  

In addition to the user manual Samsung AQ12SBGE, we also provide a support panel to help you solve your problems with Samsung AQ12SBGE. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung AQ12SBGE. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung AQ12SBGE - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.