User manual American Standard Pressure Balance Bath/Shower Fitting R120

If you found this page, you probably have a problem and you need a user manual for the device American Standard Pressure Balance Bath/Shower Fitting R120. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard Pressure Balance Bath/Shower Fitting R120 it belongs to the category Indoor Furnishings. A user manualAmerican Standard Pressure Balance Bath/Shower Fitting R120 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard Pressure Balance Bath/Shower Fitting R120 directly. You can view the user manualAmerican Standard Pressure Balance Bath/Shower Fitting R120 directly online or save and store it on your computer.

UPGRADABLE  
PRESSURE BALANCE BATH/SHOWER FITTING  
VOLUME AND TEMPERATURE CONTROL VALVE  
MODEL NUMBER:  
R120 Pressure Balance Rough Valve Body only  
Direct sweat inlets/outlets. LESS trim.  
R120SS Pressure Balance Rough Valve Body only  
with Screwdriver stops  
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.  
Available Trim Kits  
Princeton  
Reliant+  
Reliant 3  
Seva  
Colony Soft  
R125 Pressure Balance Rough Valve Body only  
Female thread inlets/outlets. LESS trim.  
R125SS Pressure Balance Rough Valve Body only  
with Screwdriver stops  
Female thread inlets/outlets. Screwdriver stops. LESS  
trim.  
Ceramix  
Jasmine  
Tendence  
Standard  
See reverse for available trim kits.  
R120 Valve Body Shown  
GENERAL DESCRIPTION:  
Cast brass body, washerless 47mm ceramic disc valve  
cartridge with volume and temperature control, and hot  
limit safety stop. Pressure balancing cartridge maintains  
constant output temperature in response to changes in  
relative hot and cold supply pressure. One-half inch  
inlets and outlets (choice of direct sweat or threaded).  
Available with screwdriver stops. Rough-in plaster guard  
designed for use as thin-wall mounting adaptor. Valve  
body will accept a variety of decorative Bath/Shower  
trim kits.  
41mm TO 83mm  
(
1-5/8 TO 3-1/4)  
FINISHED WALL  
VALVE BODY  
OPTIONS  
1
/2" NPT  
INLETS  
103 mm  
(
4-1/16")  
SHR. 1/2" NOM.  
COPPER SWEAT  
5
(2-1/32")  
1.5 mm  
INLETS 1/2" NOM.  
COPPER SWEAT  
1
03 mm  
4-1/16")  
(
TUB 1/2" NOM.  
COPPER SWEAT  
SWEAT (R120)  
1
(5-7/8")  
49 mm  
OPTIONAL TO FINISHED  
PRODUCT FEATURES:  
Cast Brass Valve Body: Durable - Quality that will  
last a lifetime. Ideal material for prolonged contact with  
water.  
FLOOR USUALLY  
BETWEEN 1651mm (65)  
AND 1981mm (78)  
SHR. 1/2" NOM.  
51 mm  
(2")  
COPPER SWEAT  
INLETS  
1/2" NPT  
103 mm  
(4-1/16")  
TUB 1/2" NOM.  
COPPER SWEAT  
Ceramic Disc Valve Cartridge: Assures a lifetime  
of drip-free performance. Allows easy control over both  
water temperature and volume.  
SWEAT (STOPS) (R120SS)  
SHR  
1
/2" NPT  
Pressure Balancing Valve Cartridge: Maintains  
constant output temperature in response to changes in  
relative hot and cold supply pressure. Diaphragm  
system engineered to eliminate cross flow. Avoids  
failure due to mineral deposits - ideal for use in hard  
water.  
INLETS  
6 mm  
(3-3/8")  
8
OPTION 457 mm  
18")  
(
8
6 mm  
(
3-3/8")  
INLETS  
/2" NPT  
1
25mm  
(1 MIN.)  
TUB PORT  
/2" NPT  
1
THREADED (R125)  
Adjustable Hot Limit Safety Stop: Limits the  
amount of hot water allowed to mix with cold. Reduces  
the risk of accidental scalding.  
Exclusive Plaster Guard: Plaster guard is designed  
to protect valve during installation and serve as a  
mounting plate for thin-wall installations. Two piece  
design allows valve to be tested prior to trim  
installation.  
1
49 mm  
(5-7/8")  
1
/2"  
COPPER  
SHR.  
86 mm  
(3-3/8")  
1
/2" NOM.  
1
02 mm  
(4")  
COPPER  
SWEAT  
TOP OF TUB RIM  
TUB 1/2" NOM.  
COPPER SWEAT  
INLETS 1/2" NPT  
THREADED (STOPS) (R125SS)  
BOTTOM OF TUB  
Wide Rough-in Range: From 1-5/8" to 3-1/4".  
SUGGESTED SPECIFICATION:  
Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water  
temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure  
due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #  
R12____, Trim Kit - American Standard Model # ____.____.  
B7  
©
2006 American Standard Inc.  

In addition to the user manual American Standard Pressure Balance Bath/Shower Fitting R120, we also provide a support panel to help you solve your problems with American Standard Pressure Balance Bath/Shower Fitting R120. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard Pressure Balance Bath/Shower Fitting R120. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard Pressure Balance Bath/Shower Fitting R120 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.