User manual Panasonic CF-18

If you found this page, you probably have a problem and you need a user manual for the device Panasonic CF-18. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Panasonic CF-18 it belongs to the category Laptop. A user manualPanasonic CF-18 is taken from the manufacturer, a Panasonic company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Panasonic CF-18 directly. You can view the user manualPanasonic CF-18 directly online or save and store it on your computer.

Read Me First  
1
0.According to the FCC’s electrical safety advisory, we recom-  
mend that you may install anAC surge arrestor in theAC out-  
let to which this equipment is connected. Telephone compa-  
nies report that electrical surges, typically lightning transients,  
are very destructive to customer terminal equipment connected  
to AC power sources and that this is a major nationwide prob-  
lem.  
Notice for the products using LCD  
This product uses one or more fluorescent lamps containing a  
small amount of mercury. It also contains lead in some compo-  
nents. Disposal of these materials may be regulated in your com-  
munity due to environmental considerations. For disposal or  
recycling information please contact your local authorities, or  
the Electronics Industries Alliance: <http://www.eiae.org/>  
Caution: To reduce the risk of fire, use only No.26AWG or larger telecom-  
munication line cord.”  
ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des  
conducteurs de télécommunications 26 AWG ou de section supérieure.”  
For Canada  
Industry Canada (IC) Notice for modem  
This equipment contains an Industry Canada approved modem unit.  
The Industry Canada label is affixed on the modem unit.  
RESTRICTIONS CONCERNANT LE RACCORDEMENT  
DE MATÉRIEL  
“AVIS: L’étiquette d’Industrie Canada identifie le matériel  
homologué. Cette étiquette certifie que le matériel est  
conforme aux normes de protection, d’exploitation et de  
sécurité des réseaux de télécommunications, comme le  
prescrivent les documents concernant les exigences  
techniques relatives au matériel terminal. Le Ministère  
n’assure toutefois pas que le matériel fonctionnera à la  
satisfaction de l’utilisateur.  
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il  
est permis de le raccorder aux installations de l’entreprise  
locale de télécommunication. Le matériel doit également être  
installé en suivant une méthode acceptée de raccordement.  
L’abonné ne doit pas oublier qu’il est possible que la  
conformité aux conditions énoncées ci-dessus n’empêche  
pas la dégradation du service dans certaines situations.  
Les réparations de matériel homologué doivent être  
coordonnées par un représentant désigné par le fournisseur.  
L’entreprise de télécommunications peut demander à  
l’utilisateur de débrancher un appareil à la suite de  
réparations ou de modifications effectuées par l’utilisateur  
ou à cause de mauvais fonctionnement.  
Pour sa propre protection, l’utilisateur doit s’assurer que tous  
les fils de mise à la terre de la source d’énergie électrique,  
des lignes téléphoniques et des canalisations d’eau  
métalliques, s’il y en a, sont raccordés ensemble. Cette  
précaution est particulièrement importante dans les régions  
rurales.Avertissement: L’utilisateur ne doit pas tenter de faire  
ces raccordements lui-même; il doit avoir recours à un service  
d’inspection des installations électriques, ou à un électricien,  
selon le cas.”  
EQUIPMENT ATTACHMENT LIMITATIONS  
NOTICE: The Industry Canada label identifies certified  
equipment. This certification means that the equipment meets  
telecommunications network protective, operational and  
safety requirements as prescribed in the appropriateTerminal  
Equipment Technical Requirements document(s). The  
Department does not guarantee the equipment will operate  
to the user’s satisfaction.  
Before installing this equipment, users should ensure that it  
is permissible to be connected to the facilities of the local  
telecommunications company. The equipment must also be  
installed using an acceptable method of connection. The  
customer should be aware that compliance with the above  
conditions may not prevent degradation of service in some  
situations.  
Repairs to certified equipment should be coordinated by a  
representative designated by the supplier. Any repairs or  
alterations made by the user to this equipment, or equipment  
malfunctions, may give the telecommunications company  
cause to request the user to disconnect the equipment.  
Users should ensure for their own protection that the  
electrical ground connections of the power utility, telephone  
lines and internal metallic water pipe system, if present, are  
connected together. This precaution may be particularly  
important in rural areas. Caution: Users should not attempt  
to make such connections themselves, but should contact  
the appropriate electric inspection authority, or electrician,  
as appropriate.”  
“NOTICE: The Ringer Equivalence Number (REN) assigned  
“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné  
to each terminal device provides an indication of the  
maximum number of terminals allowed to be connected to a  
telephone interface. The termination on an interface may  
consist of any combination of devices subject only to the  
requirement that the sum of the Ringer Equivalence Numbers  
of all the devices does not exceed 5.”  
à chaque dispositif terminal indique le nombre maximal de  
terminaux qui peuvent être raccordés à une interface. La  
terminaison d’une interface téléphonique peut consister en  
une combinaison de quelques dispositifs, à la seule condition  
que la somme d’indices d’équivalence de la sonnerie de touts  
les dispositifs n’excède pas 5.”  
REN: See bottom of the computer  
IES: Voir sous le fond de l’ordinateur  
Industry Canada  
This product complies with RSS210 Industry Canada.  
Operation is subject to the following two conditions;  
(
(
1) this device may not cause interference, and  
2) this device must accept any interference, including interfer-  
ence that may cause undesired operation of the device.  
4

In addition to the user manual Panasonic CF-18, we also provide a support panel to help you solve your problems with Panasonic CF-18. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Panasonic CF-18. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Panasonic CF-18 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.