User manual Apple PCI or AGP Card

If you found this page, you probably have a problem and you need a user manual for the device Apple PCI or AGP Card. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Apple PCI or AGP Card it belongs to the category Network Card. A user manualApple PCI or AGP Card is taken from the manufacturer, a Apple company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Apple PCI or AGP Card directly. You can view the user manualApple PCI or AGP Card directly online or save and store it on your computer.

PCI or AGP Card  
Replacement Instructions  
Follow the instructions in this sheet carefully. Failure to follow these instructions could  
damage your equipment and void its warranty.  
Online instructions covering customer-installable parts are available at  
Note: Xserve provides three slots for PCI expansion cards. Two slots are on a riser card  
located at the back left corner of the logic board; an additional slot is on a riser card at the  
back right corner of the logic board. A PCI card that is 7 inches long can be installed in  
either riser card; a PCI card that is 12 inches long can be installed only in the dual-slot  
riser. In addition, an AGP card can be installed in the single-slot riser.  
Tools Required  
No tools are required for this procedure.You may, however, find a Phillips screwdriver  
useful in releasing the thumbscrews at the front of the server.  
Opening the Server  
The server slides open from the front of the rack. The top cover remains in place in the  
rack while the bottom housing (containing all internal components) should be placed on a  
sturdy, flat surface.  
. Alert users that the server will be unavailable for a period of time.  
. Shut down the server.  
Warning:To avoid damaging internal components or causing injury, always  
shut down the server before opening it. After you shut down the server, internal  
components can be very hot. Let the server cool down before continuing.  
. Write down the server’s serial number, which is located on the back panel. If it is  
necessary to set up the server’s software after you replace a PCI or AGP card, you will  
be asked for the serial number at login.  
073-0672 Rev. A  

In addition to the user manual Apple PCI or AGP Card, we also provide a support panel to help you solve your problems with Apple PCI or AGP Card. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Apple PCI or AGP Card. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Apple PCI or AGP Card - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.