User manual Apple Xserve 073-0711

If you found this page, you probably have a problem and you need a user manual for the device Apple Xserve 073-0711. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Apple Xserve 073-0711 it belongs to the category Network Card. A user manualApple Xserve 073-0711 is taken from the manufacturer, a Apple company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Apple Xserve 073-0711 directly. You can view the user manualApple Xserve 073-0711 directly online or save and store it on your computer.

2. Install the replacement logic board in the bottom housing, making sure the board fits  
over the four mounting pegs on the chassis floor.  
Warning:When replacing the logic board, make sure the ports and the identifier  
button on the back of the board align with the openings in the chassis.  
3
4
5
6
7
. Tighten the thumb screw that secures the logic board to the chassis.  
. Reconnect the power supply to the logic board.  
. Tighten the thumb screw that secures the power supply to the chassis.  
. Reconnect the power supply cable to the drive interconnect board.  
. Reconnect the ATA controller board to the drive interconnect and logic boards.  
Note: When replacing the ATA controller board, align it over the two pairs of  
connectors on the drive interconnect and logic boards, making sure the “MLB” arrow  
printed on it points toward the logic board, and press down. (Figure 12)  
Figure 12  
Xserve Logic Board with Processor/Heatsink - 10  

In addition to the user manual Apple Xserve 073-0711, we also provide a support panel to help you solve your problems with Apple Xserve 073-0711. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Apple Xserve 073-0711. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Apple Xserve 073-0711 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.