User manual American Standard CADET 3985

If you found this page, you probably have a problem and you need a user manual for the device American Standard CADET 3985. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard CADET 3985 it belongs to the category Plumbing Product. A user manualAmerican Standard CADET 3985 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard CADET 3985 directly. You can view the user manualAmerican Standard CADET 3985 directly online or save and store it on your computer.

Installation  
Instructions  
T M  
3
985 Series  
DECK-MOUNT  
BATH FILLER  
Thank you for selecting American-Standard...the benchmark  
of fine quality for over 100 years.  
To ensure that your installation proceeds smoothly--please  
read these instructions carefully before you begin.  
Certified to comply with ANSI A112.18.1M  
U.S. Patent No. 5,819,789; D405,165  
M968236 Rev.1.2  
Required Tools  
ADJ. 6-1/2 TO 12  
Flat Blade Screwdriver  
*
Hex key  
6-5/8  
4
-3/4  
Adjustable Wrench  
MOUNTING  
SURFACE  
1
-1/4  
1
-1/8 D.  
MAX.  
3
7
-1/4  
4
Channel Locks  
Supplied with Fitting  
SPOUT ASSEMBLY  
*
3/4-14 MALE  
N.P.T. INLETS  
1-1/16 D.  
(
H)  
(C)  
PREPARE TUBE AND TEE ASSEMBLY  
2
Prepare TUBE and TEE ASSEMBLY (1) to fit center to center  
VALVE (2) location (between 6-1/2" and12"). If necessary,  
cut and/or bend TUBING carefully. Make sure tube bend is  
close to the TEE (1) so that it will not effect the compression  
joint at the VALVE CONNECTION.  
1
CAUTION  
Turn off hot and cold water supplies before beginning.  
Insert SPOUT SHANK (1) through center hole of MOUNTING LEDGE.  
Make sure that the RUBBER RING (2) is properly seated in RECESS  
at base of SPOUT (3).  
Assemble RUBBER WASHER (4) and BRASS WASHER (5) onto  
SHANK (1). From underside of ledge secure SPOUT (3) into position  
with LOCKNUT (6).  
Remove COUPLING NUT (3) and FERRULE (4) from each  
VALVE (2) and slide onto TUBING (5).  
4
3
1
5
3
4
3
1
RECESS  
2
MOUNTING  
LEDGE.  
4
2
5
6
ADJ. 6-1/2 TO 12  
NOTE VALVE inlet is 3/4-inch NPT male connector.  

In addition to the user manual American Standard CADET 3985, we also provide a support panel to help you solve your problems with American Standard CADET 3985. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard CADET 3985. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard CADET 3985 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.