User manual American Standard ELITE 4454

If you found this page, you probably have a problem and you need a user manual for the device American Standard ELITE 4454. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard ELITE 4454 it belongs to the category Plumbing Product. A user manualAmerican Standard ELITE 4454 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard ELITE 4454 directly. You can view the user manualAmerican Standard ELITE 4454 directly online or save and store it on your computer.

Installation  
Instructions  
4453 SERIES  
ELITE  
SINGLE CONTROL KITCHEN FAUCET  
and HAND SPRAY  
4454 SERIES  
Thank you for selecting American-Standard...  
the benchmark of fine quality for over 100 years.  
To ensure that your installation proceeds smoothly--  
please read these instructions carefully before you begin.  
Certified to comply with ANSI A112.18.1M  
M968202 REV.1.2  
TOOLS REQUIRED  
Phillips Screwdriver  
Regular Screwdriver  
Channel Locks  
Adjustable Wrench  
Plumbers' Putty or Caulking  
CARE:  
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.  
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A  
CLOTH WITH A COARSE SURFACE.  
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON  
Turn off hot and cold water  
1
CAUTION  
supplies before beginning.  
(
A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON WITH PUTTY PLATE (1).  
Insert supply HOSES (3) and SHANK (4) through hole of ESCUTCHEON WITH PUTTY PLATE (1) and mounting surface.  
Make certain the SQUARE SEAL RING (2) is properly seated in recess of SPOUT BASE. Follow mounting instructions below  
to secure faucet to mounting surface.  
(
B) Installation less ESCUTCHEON (1). Remove ESCUTCHEON WITH PUTTY PLATE (1) and Insert supply HOSES (3) and  
SHANK (4) through mounting hole and seat SPOUT BASE onto sink or mounting surface. Make certain the SQUARE SEAL  
RING (2) is properly seated in recess of SPOUT BASE. Do not use putty.  
Assemble RUBBER WASHER (5), BRASS WASHER (6), and threaded LOCKNUT (7) onto SHANK (4) from underside  
of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8) from HOT to COLD  
is centered.  
Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening  
the screws slightly each time until all are snug to ensure even pressure.  
8
A
B
8
SPOUT BASE  
SPOUT BASE  
SQUARE  
SEAL RING  
SQUARE  
SEAL RING  
2
1
2
3
4
PUTTY  
3
9
4
SINK OR  
MOUNTING  
SURFACE  
5
5
6
6
9
7
7

In addition to the user manual American Standard ELITE 4454, we also provide a support panel to help you solve your problems with American Standard ELITE 4454. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard ELITE 4454. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard ELITE 4454 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.