User manual American Standard LAKELAND 4114.1

If you found this page, you probably have a problem and you need a user manual for the device American Standard LAKELAND 4114.1. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard LAKELAND 4114.1 it belongs to the category Plumbing Product. A user manualAmerican Standard LAKELAND 4114.1 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard LAKELAND 4114.1 directly. You can view the user manualAmerican Standard LAKELAND 4114.1 directly online or save and store it on your computer.

Installation  
Instructions  
LAKELAND  
4
114.100  
SINGLE CONTROL KITCHEN  
PULL-OUT FAUCET  
Thank you for selecting American-Standard...  
the benchmark of fine quality for over 100 years.  
To ensure that your installation proceeds smoothly--  
please read these instructions carefully before you begin.  
Certified to comply with ANSI A112.18.1M  
M968470 REV. 1.4  
TOOLS REQUIRED  
Phillips Screwdriver  
Regular Screwdriver  
Adjustable Wrench  
Plumbers' Putty or Caulking  
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON  
1
Turn off hot and cold water  
CAUTION  
supplies before beginning.  
(
A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1).  
Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface.  
Follow mounting instructions below to secure faucet to mounting surface.  
(
B) Installation less ESCUTCHEON (1). Discard ESCUTCHEON with PUTTY PLATE (1). Insert supply HOSES (2) and  
SHANK (3) through mounting hole and seat SPOUT BASE onto sink or mounting surface. Do not use putty.  
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside  
of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD  
is centered.  
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening  
the screws slightly each time until all are snug to ensure even pressure.  
7
7
A
B
SPOUT BASE  
1
3
2
PUTTY  
2
3
SINK OR  
MOUNTING  
SURFACE  
4
4
5
5
8
8
6
6

In addition to the user manual American Standard LAKELAND 4114.1, we also provide a support panel to help you solve your problems with American Standard LAKELAND 4114.1. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard LAKELAND 4114.1. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard LAKELAND 4114.1 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.