User manual American Standard HAMPTON 7222.722

If you found this page, you probably have a problem and you need a user manual for the device American Standard HAMPTON 7222.722. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database American Standard HAMPTON 7222.722 it belongs to the category Plumbing Product. A user manualAmerican Standard HAMPTON 7222.722 is taken from the manufacturer, a American Standard company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device American Standard HAMPTON 7222.722 directly. You can view the user manualAmerican Standard HAMPTON 7222.722 directly online or save and store it on your computer.

Installation  
Instructions  
7
7
7
7
7
7
220.702 7221.722  
220.712 7221.732  
220.722 7222.702  
220.732 7222.712  
221.702 7222.722  
221.712 7222.732  
TWO HANDLE BATH/SHOWER SET  
Thank you for selecting American-Standard...the benchmark  
of fine quality for over 100 years.  
Certified to comply with ANSI A112.18.1M  
U.S. Patent No. 5,819,789  
To ensure that your installation proceeds smoothly--  
please read these instructions carefully before you begin.  
US60406 REV. 1.2  
ROUGHING-IN DIMENSIONS  
ROUGHING-IN  
Turn off hot and cold water  
supplies before beginning.  
CAUTION  
NOTE: NO CONCEALED PIPING FURNISHED  
1
SHOWER AND SPOUT  
IMPORTANT: DO NOT REMOVE PLASTER GUARDS (2) UNTIL STEP 2.  
1
-1/4 DIA HOLE  
FINISHED  
WALL  
1
/2" N.P.T.  
Prepare water supplies per Roughing-in Dimensions. Apply sealing tape  
to all threaded connections.  
SHOWER ARM  
Install VALVE (1) at indicated height and depth. Make sure the outlet marked  
"
SHR" is pointing upward. Mount VALVE (1) to cross brace with wood screws.  
5
REF.  
Slip COUPLING NUT over supply pipe and thread UNION SWIVEL to pipe.  
Connect HOT (6) water supply to LEFT valve inlet and COLD (7) water supply  
to RIGHT valve inlet.  
OPTIONAL TO FINISHED  
FLOOR USUALLY  
BETWEEN 65'' AND 78''  
Prepare SHOWER RISER (4) and ELBOW (3). Connect to TOP outlet, marked  
"
SHR" of VALVE BODY (1).  
Prepare TUB FILLER PIPE (8), ELBOW (10) and roughing-in COPPER PIPE (9).  
Connect to BOTTOM outlet of VALVE BODY (1).  
7
REF.  
2
" MIN.  
Add cross braces to wall structure and secure piping.  
3
-1/4" MAX.  
Cap NIPPLES (5) and COPPER PIPE (9). Open supply lines and check for leaks.  
Remove PLASTER GUARDS (2). Use spline on end of PLASTER GUARD (2) to  
open both VALVES and check for leaks.  
Close both valves and turn off water supplies. Replace PLASTER GUARDS (2).  
Finish wall construction.  
1
/2" N.P.T. TO  
SHOWER  
(2) 1-13/16" DIA. HOLES  
FOR VALVES ON 8"  
CENTERS (1) 1-13/16"  
DIA. HOLE FOR CENTER  
TRANSFER VALVE  
3
CROSS  
BRACE  
1
-3/4  
1
-3/4  
TYP.  
5
1
8 OPTIONAL  
4
UNION INLET  
1/2"-14 N.P.T.  
1" MIN.  
CROSS  
BRACE  
(
SHR)  
4
"
4
5
-1/8"  
REF.  
1
/2" COPPER  
"HOT"  
1
TOP OF  
TUB RIM  
"
MAX WALL"  
2
BOTTOM OF TUB  
PLASTER  
GUARD  
"COLD"  
Recommended Tools  
Flat Blade Screwdriver  
Adjustable Wrench  
6
UNION  
Phillips Screwdriver  
SWIVEL  
8
7
9
COUPLING  
NUT  
Plumbers' Putty or Caulking  
1
0
"
COLD"  
Channel Locks  
*
Hex key Supplied with Fitting  

In addition to the user manual American Standard HAMPTON 7222.722, we also provide a support panel to help you solve your problems with American Standard HAMPTON 7222.722. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with American Standard HAMPTON 7222.722. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with American Standard HAMPTON 7222.722 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.