User manual Hitachi VM-2800A

If you found this page, you probably have a problem and you need a user manual for the device Hitachi VM-2800A. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Hitachi VM-2800A it belongs to the category Camcorder. A user manualHitachi VM-2800A is taken from the manufacturer, a Hitachi company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Hitachi VM-2800A directly. You can view the user manualHitachi VM-2800A directly online or save and store it on your computer.

CHARGING A BATTERY  
CHARGING A BATTERY  
2
1
. Plug the AC adaptor/charger power cord into AC electrical outlet.  
2
. Attach the battery to the AC adaptor/charger. Align the mark " " on the battery with that of  
AC adaptor/charger and push the battery flush with the AC adaptor/charger and slide it in the  
direction of arrow.  
NOTE: You must remove the DC cord from the AC adaptor/charger to charge the battery. If  
the DC cord is connected, "CHARGE" light will not light.  
3
. The "CHARGE" light will be lit while the battery is accepting a charge, and will go out  
when the battery is fully charged.  
Charging Time and Operation Time  
VM-BP66  
VM-BP67  
Charging Time  
Operation Time  
about 2 hours  
about 1 hour about 2 hours  
about 3 hours  
NOTES:  
1
2
3
. The operation time depends on how often you use zoom and recording pause.  
. Charge the battery after each use and store it at normal room temperature.  
. Recharge the battery at least once every six months. The battery is a lead-acid battery.  
This battery tends to discharge if not used for an extended period of time. If the battery is  
stored for an extended length of time without being recharged, you may not be able to  
recharge it.  
4
. A battery charged after being stored for a long period may not supply power for the  
specified time. Additional rechargings will help restore the battery's operation time.  
. The battery should be charged at a temperature of 50 ºF--86ºF (10ºC--30ºC) to prevent  
damage.  
. Do not operate the battery at temperatures below 14ºF (-10ºC) or above 95ºF (35ºC).  
5
6
1
5

In addition to the user manual Hitachi VM-2800A, we also provide a support panel to help you solve your problems with Hitachi VM-2800A. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Hitachi VM-2800A. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Hitachi VM-2800A - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.