User manual Fujitsu MB15E07SL

If you found this page, you probably have a problem and you need a user manual for the device Fujitsu MB15E07SL. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Fujitsu MB15E07SL it belongs to the category Recording Equipment. A user manualFujitsu MB15E07SL is taken from the manufacturer, a Fujitsu company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Fujitsu MB15E07SL directly. You can view the user manualFujitsu MB15E07SL directly online or save and store it on your computer.

MB15E07SL  
PHASE COMPARATOR OUTPUT WAVEFORM  
fr  
fp  
t
WU  
tWL  
LD  
[FC = “H”]  
D
O
[FC = “L”]  
D
O
Notes : Phase error detection range: –2π to +2π  
Pulses on Do signal during locked state are output to prevent dead zone.  
LD output becomes low when phase is tWU or more. LD output becomes high when phase error  
is tWL or less and continues to be so for three cycles or more.  
t
t
t
WU and tWL depend on OSCIN input frequency.  
WU > 2/fosc (s) (e. g. tWU > 156.3 ns, fosc = 12.8 MHz)  
WU < 4/fosc (s) (e. g. tWL < 312.5 ns, fosc = 12.8 MHz)  
LD becomes high during the power saving mode (PS = “L”).  
1
4

In addition to the user manual Fujitsu MB15E07SL, we also provide a support panel to help you solve your problems with Fujitsu MB15E07SL. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Fujitsu MB15E07SL. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Fujitsu MB15E07SL - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.