User manual Kramer Electronics Satellite Radio TP-114

If you found this page, you probably have a problem and you need a user manual for the device Kramer Electronics Satellite Radio TP-114. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Kramer Electronics Satellite Radio TP-114 it belongs to the category Satellite Radio. A user manualKramer Electronics Satellite Radio TP-114 is taken from the manufacturer, a Kramer Electronics company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Kramer Electronics Satellite Radio TP-114 directly. You can view the user manualKramer Electronics Satellite Radio TP-114 directly online or save and store it on your computer.

Overview  
3
Overview  
Your Kramer TOOLS TP-114 1:4 XGA/HD DA/CAT 5 Transmitter is a  
high-performance distribution amplifier for computer graphics video or  
HDTV signals. It converts a computer graphics video or HDTV signal on a  
1
5-pin HD connector to four identical twisted pair signals.  
The TP-114:  
1
2
Receives a computer graphics /HD si3gnal and transmits it over four  
CAT 5 cables to appropriate receivers  
Has a resolution of up to UXGA, and a transmission range of more than  
3
00 feet (more than 100 meters)  
Can change the polarity of decoding H and V Sync for video  
Includes the Power Connect™ feature  
Is powered by 12V DC  
3.1 About the Power Connect Feature  
The Power Connect™ feature applies as long as the cable can carry power.  
This feature is available when using STP cable and the distance does not  
exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge  
4
cable should be used . For units which are connected via RJ-45 connectors,  
make sure that the shield of the STP cable is connected to the metal casing  
of the connectors on both ends of the cable. For units which are connected  
via terminal block connectors, the shield of the STP cable must be  
connected to a ground terminal on the units at both ends (use the ground  
terminal of the power supply connection if necessary).  
For a CAT 5 cable exceeding a distance of 50m, separate power supplies  
should be connected to the transmitter and to the receiver simultaneously.  
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)  
We recommend that you use Shielded Twisted Pair (STP) cable. There are  
different levels of STP cable available, and we advise you to use the best  
quality STP cable that you can afford. Our non-skew-free cable, Kramer  
BC-STP is intended for analog signals where skewing is not an issue. For  
1
The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an 15-pin HD connector  
having a resolution from VGA up to UXGA  
2
3
4
The TP-114 accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p  
Note that the CAT 5 connectors exclude audio  
CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances  
3

In addition to the user manual Kramer Electronics Satellite Radio TP-114, we also provide a support panel to help you solve your problems with Kramer Electronics Satellite Radio TP-114. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Kramer Electronics Satellite Radio TP-114. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Kramer Electronics Satellite Radio TP-114 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.