User manual Kramer Electronics Satellite Radio TP-114

If you found this page, you probably have a problem and you need a user manual for the device Kramer Electronics Satellite Radio TP-114. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Kramer Electronics Satellite Radio TP-114 it belongs to the category Satellite Radio. A user manualKramer Electronics Satellite Radio TP-114 is taken from the manufacturer, a Kramer Electronics company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Kramer Electronics Satellite Radio TP-114 directly. You can view the user manualKramer Electronics Satellite Radio TP-114 directly online or save and store it on your computer.

Configuring a TP-114 XGA/HD Line Transmitter – DA System  
1
. On the TP-114, connect the XGA/HD source (for example, a computer  
graphics/HD source) to the1XGA IN 15-pin HD connector, and connect the  
line output RJ-45 connector :  
ƒ
ƒ
ƒ
ƒ
OUT 1 connector to the LINE IN RJ-45 connector on the first  
TP-120  
OUT 2 connector to the LINE IN RJ-45 connector on the second  
TP-120  
OUT 3 connector to the LINE IN RJ-45 connector on the third  
TP-120  
OUT 4 connector to the LINE IN RJ-45 connector on the fourth  
TP-120  
2. On the four TP-120 units, connect the:  
ƒ
ƒ
ƒ
ƒ
XGA OUT 15-pin HD connector of the first TP-120 unit to the  
XGA/HD acceptor (for example, display 1)  
XGA OUT 15-pin HD connector of the second TP-120 unit to the  
XGA/HD acceptor (for example, display 2)  
XGA OUT 15-pin HD connector of the third TP-120 unit to the  
XGA/HD acceptor (for example, display 3)  
XGA OUT 15-pin HD connector of the fourth TP-120 unit to the  
XGA/HD acceptor (for example, display 4)  
3. On each Kramer TOOL, connect the 12V DC power adapter to the power  
socket and connect the adapter to the mains electricity.  
The signal from the XGA source is transmitted via the CAT 5 cables,  
decoded and converted at the each of the XGA OUT 15-pin HD connectors  
to the XGA acceptors.  
4
. On the TP-120 units, if necessary:  
2
ƒ
ƒ
Set the H SYNC and V SYNC switches on the underside  
Adjust the video output signal level and/or cable compensation  
3
equalization level  
4
5
. On the TP-114, if necessary, set the VS and HS switches on the underside  
1
Via UTP cabling (with a range of more than 300ft (>100m)). For details of how to wire a CAT 5 LINE IN/LINE OUT  
RJ-45 connector, see section 1. 5  
2
3
4
By default, both switches are set down (for negative V SYNC and H SYNC polarity)  
Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level  
By default, both switches are set down (to NORMAL) to retain the VS and HS polarity  
7

In addition to the user manual Kramer Electronics Satellite Radio TP-114, we also provide a support panel to help you solve your problems with Kramer Electronics Satellite Radio TP-114. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Kramer Electronics Satellite Radio TP-114. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Kramer Electronics Satellite Radio TP-114 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.