User manual Radio Shack PRO-83

If you found this page, you probably have a problem and you need a user manual for the device Radio Shack PRO-83. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Radio Shack PRO-83 it belongs to the category Scanner. A user manualRadio Shack PRO-83 is taken from the manufacturer, a Radio Shack company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Radio Shack PRO-83 directly. You can view the user manualRadio Shack PRO-83 directly online or save and store it on your computer.

X Make sure the power is turned off.  
Y If the adapter has a voltage switch, set the switch  
to 6V.  
Z Insert the Adaptaplug into the DC adapter's cord  
so it reads TIP +. Then, insert the Adaptaplug into  
the scanner's DC 6V jack.  
[
Plug the other end of the adapter into your  
vehicle's cigarette-lighter socket.  
If rechargeable batteries are installed and  
ALKALINE/RECHARGEABLE is set to  
RECHARGEABLE, the adapter powers the scanner  
and recharges the installed batteries at the same  
time.  
Note: If the scanner does not operate properly  
when you use a DC adapter, unplug the adapter  
from the cigarette-lighter socket and clean the  
socket to remove ashes and debris.  
The Basics  
12  

In addition to the user manual Radio Shack PRO-83, we also provide a support panel to help you solve your problems with Radio Shack PRO-83. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Radio Shack PRO-83. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Radio Shack PRO-83 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.