User manual Quatech Server ABDG-SE-IN5410

If you found this page, you probably have a problem and you need a user manual for the device Quatech Server ABDG-SE-IN5410. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Quatech Server ABDG-SE-IN5410 it belongs to the category Server. A user manualQuatech Server ABDG-SE-IN5410 is taken from the manufacturer, a Quatech company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Quatech Server ABDG-SE-IN5410 directly. You can view the user manualQuatech Server ABDG-SE-IN5410 directly online or save and store it on your computer.

AirborneDirect™ Serial Device Server Quick Start Guide  
Quatech, Inc.  
Step  
Description  
Select Wireless LAN Connection Type If you are using Access Points make sure this is set to  
Infrastructure from the drop down menu.  
If you want to use AdHoc set this accordingly. Additional  
settings may be required to fully configure for AdHoc mode.  
Please refer to the User’s Manual for details.  
Select SSID  
Enter the name of the wireless network you wish to access. This  
field is case sensitive.  
Select Wireless LAN Security Type  
Select the security type the wireless network you wish to access  
is using. Depending upon the option you choose you may have  
to enter additional information. Once you have selected the  
security type the required inputs will be made accessible by un-  
graying the fields that must be completed.  
If the security type is not in the available selections, more are  
available in the WLAN Security Settings page. If you choose to  
use this page make sure you commit the changes you have  
already made before moving to the WLAN Security Settings  
page.  
Select WLAN DHCP  
If your WLAN network uses DHCP to assign IP addresses to the  
wireless clients, select Enabled from the drop down menu.  
If you are using static IP addresses select disabled from the  
drop down menu. WLAN Static IP and WLAN Subnet Mask  
will need to be entered.  
Select Ethernet DHCP  
If the Ethernet network connected to the Ethernet port uses  
DHCP to assign IP addresses to the wired clients, you should  
select Enabled from the drop down menu.  
If you are using static IP addresses you should select Disabled  
from the drop down menu. Ethernet Static IP and Ethernet  
Subnet Mask will need to be entered.  
Important: This field is only used if the Ethernet interface is  
set as a client (default for Serial devices). If set as a router the  
field is ignored. See the User’s Manual for a full description of  
configuring the unit as an Ethernet router.  
Select WLAN Static IP  
This field defines the static IP address for the wireless interface.  
This address is only used if the WLAN DHCP is disabled or  
DHCP failed.  
Default: 192.168.10.1  
Select WLAN Subnet Mask  
This field defines the subnet mask used by the wireless  
interface.  
This mask is only used if the WLAN DHCP is disabled or DHCP  
failed.  
Default: 255.255.255.0  
Select Ethernet Static IP  
Select Ethernet Subnet Mask  
Press Commit [Button]  
This field defines the static IP address for the Ethernet  
interface. When configured as a serial device server (Ethernet  
interface is in client mode) this address is only used if the  
Ethernet DHCP is disabled or DHCP failed.  
Default: 192.168.2.100  
This field defines the subnet mask used by the Ethernet  
interface. When configured as a serial device server (Ethernet  
interface is in client mode) this mask is only used if the  
Ethernet DHCP is disabled or DHCP failed.  
Default: 255.255.255.0  
Saves changes to the device.  
Optional  
Reloads the Express Settings page. Select this is you have  
further configuration options to change.  
Press Reload [Button]  
100-8106-210  
5
February 2011  

In addition to the user manual Quatech Server ABDG-SE-IN5410, we also provide a support panel to help you solve your problems with Quatech Server ABDG-SE-IN5410. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Quatech Server ABDG-SE-IN5410. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Quatech Server ABDG-SE-IN5410 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.