User manual WatchGuard Technologies Server 700

If you found this page, you probably have a problem and you need a user manual for the device WatchGuard Technologies Server 700. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database WatchGuard Technologies Server 700 it belongs to the category Server. A user manualWatchGuard Technologies Server 700 is taken from the manufacturer, a WatchGuard Technologies company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device WatchGuard Technologies Server 700 directly. You can view the user manualWatchGuard Technologies Server 700 directly online or save and store it on your computer.

3
4
Install the power cord from the Firebox AC receptacle to a power  
source.  
When prompted to do so during the QuickSetup wizard (described in  
“Running the QuickSetup Wizard” on page 11), select Use Serial  
Cable to Assign IP Address as the configuration access method.  
Initializing a Firebox using a modem  
The following are required when using a modem:  
Management Station running Firebox System 4.6 or later and  
equipped with a modem, Dial-Up Networking software, and a  
working telephone line.  
1
Any Firebox III model, equipped with an external modem, a modem  
cable, and a working telephone line.  
Use the blue null serial cable and adaptors included with the Firebox  
to connect the Firebox CONSOLE port and external serial port in a  
loopback configuration.  
2
Turn the power on the Firebox off, then on. Confirm that the SysB  
light is lit.  
The Firebox is now ready to accept the out-of-band connection.  
Initializing a Firebox using remote provisioning  
Use remote provisioning to initialize a Firebox in the case where a router  
sits between the Management Station and the Firebox network  
connection. Because of the flexibility of being able to initialize a Firebox  
from virtually any location on a network, remote provisioning is a very  
versatile option. However, it has the following restrictions:  
During provisioning, the Firebox and the router should be the only  
devices on the network.  
You must be able to flush the local router’s ARP tables, preferably by  
rebooting the router.  
The Firebox must be initialized with Firebox System 4.6 or later.  
Make sure the following conditions exist prior to using remote  
provisioning:  
The Firebox is attached as the only device behind a working router.  
10  
Hardware Guide  

In addition to the user manual WatchGuard Technologies Server 700, we also provide a support panel to help you solve your problems with WatchGuard Technologies Server 700. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with WatchGuard Technologies Server 700. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with WatchGuard Technologies Server 700 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.