User manual CyberPower Sleep Apnea Machine AN1302

If you found this page, you probably have a problem and you need a user manual for the device CyberPower Sleep Apnea Machine AN1302. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database CyberPower Sleep Apnea Machine AN1302 it belongs to the category Sleep Apnea Machine. A user manualCyberPower Sleep Apnea Machine AN1302 is taken from the manufacturer, a CyberPower company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device CyberPower Sleep Apnea Machine AN1302 directly. You can view the user manualCyberPower Sleep Apnea Machine AN1302 directly online or save and store it on your computer.

Shutdown NAS in PowerPanel  
When a power event occurs, the external command execution will be initiated prior to the computer being shut  
down. Refer to the Suggestions chapter for more details.  
Configure Proper Delay Time to Turn Off UPS  
When a shutdown procedure is initiated, the UPS will delay the shutdown of its own outlets. This delay must  
be long enough to allow for the computer shutdown of both the NAS and the computer. The default setting is  
600 seconds (10 minutes). This setting will need to be changed if your NAS and computer take longer than 10  
minutes to shut down.  
1.  
Stop daemon of PowerPanel.  
etc/init.d/pwrstatd stop  
/
2
.
.
Use vi to open /etc/pwrstatd.conf.  
3
Search for shutdown-sustain = 600 and modify it for the necessary time (in seconds) your NAS and  
computer to shut down.  
4
.
.
Save the file and quit vi.  
Start the PowerPanel daemon.  
5
/
etc/init.d/pwrstatd start  
Suggestion  
1.  
A NAS remote login requires admin or root account. Note: The Synology NAS equipment requires root  
password whose default password is same as administrator password.  
2.  
Because your IP address which is dynamically obtained may change, you must use the domain name to  
replace with the IP address. The NAS shutdown may not work due to the IP address changed.  
Recommends using DDNS service to resolve the dynamic IP address issue. Refer to NAS users manual  
for advanced details about DDNS service.  
3.  
PowerPanel software had tested on Synology and QNAP NAS.  
8

In addition to the user manual CyberPower Sleep Apnea Machine AN1302, we also provide a support panel to help you solve your problems with CyberPower Sleep Apnea Machine AN1302. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with CyberPower Sleep Apnea Machine AN1302. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with CyberPower Sleep Apnea Machine AN1302 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.