User manual EV Rider EVF-1152S/94-FG

If you found this page, you probably have a problem and you need a user manual for the device EV Rider EVF-1152S/94-FG. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database EV Rider EVF-1152S/94-FG it belongs to the category Speaker. A user manualEV Rider EVF-1152S/94-FG is taken from the manufacturer, a EV Rider company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device EV Rider EVF-1152S/94-FG directly. You can view the user manualEV Rider EVF-1152S/94-FG directly online or save and store it on your computer.

EVF-1Si1ng5le21S5/9Tw4o--FWGay  
9
0° x 40° Full-Range  
Fully-Weatherized  
Loudspeaker System  
Key Features:  
Fully Weatherized Fiberglass Finish with Gland  
Nut and Stainless Steel Grille  
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit  
Pure Titanium Compression Driver  
SMX2151 15” (381mm) LF Transducer with Fully  
Symmetric Drive  
Advanced 4th Order Crossover Network with HF  
Protection  
Coverage Pattern: 90° x 40° Constant  
TM  
Directivity 12” Rotatable Waveguide  
101 dB Sensitivity, 134 dB Maximum SPL  
System Rating: 500W Continuous, (2000W Peak)  
Active Rating: LF400W/HF40W Continuous  
(
1600W/160W Peak)  
(22) M10 Threaded Suspension Points  
General Description:  
Technical Specifications:  
Freq. Response (-3 dB): 112 Hz - 14 kHz  
Freq. Range1 (-10 dB): 55 Hz - 18 kHz  
The Electro-Voice® EVF-1152S/94-FG is a fully-weatherized, fiber-  
glass coated, high power, 2-way loudspeaker system that can be  
used in a variety of applications where high quality sound reinforce-  
ment is required in a compact, lightweight package.  
1
Rec. Hipass Frequency: 55 Hz  
Axial Sensitivity: 101 dB (1W/1m)  
Max. Calculated SPL: 134 dB  
The EVF-1152S/94-FG utilizes the ND2B, a high output 2” titanium  
compression driver, coupled to a Constant Directivity™ 90° x 40°  
waveguide. The SMX2151 15” woofer used FEA optimization for  
motor, suspension, and electrical design for very low distortion,  
high efficiency, and maximum intelligibility at high SPL levels. The  
crossover uses steep 24 dB/octave slopes with equalization for  
very smooth response in vocal range, linear off-axis response, and a  
protection circuit for long term reliability.  
Horizontal Coverage: 90° (or 40°)  
Vertical Coverage: 40° (or 90°)  
Power Handling: 500W Continuous, 2000W Peak  
LF Transducer: SMX2151, 15 in (381mm) Driver  
HF Transducer: ND2B, 2 in (51mm) Diaphragm  
Compression Driver  
The EVF-1152S/94-FG features make it ideal for many fixed install  
applications, including applications with full exposure to outdoor  
elements. The trapezoidal enclosure is constructed out of weather  
resistant birch, and coated with fiberglass for maximum protection  
from extreme outdoor elements. The unique acoustic and rigging  
design allows for vertical and horizontal clusters to be built using  
any combination of loudspeakers from the entire EVF & EVH Series,  
with 7 horn patterns to choose from and an assortment of Low Fre-  
quency and subwoofer loudspeakers, it gives you the tools to maxi-  
mize flexibility of system design, no matter what the application and  
budget. The innovative input panel provides phoenix style connec-  
tors (included in all standard models) and gland nut cover plate (for  
weatherizing applications). An externally accessible jumper selects  
passive or active operation. An available 70.7/100 Volt transformer  
kit simply mounts to the input panel for use in distributed systems.  
All these features give you the flexibility to do a large range of  
venues in extreme environments with fewer items in inventory and  
quickly support your customer’s requirements.  
Crossover Frequency: 1450 Hz  
Nominal Impedance: 8 Ohms  
Minimum Impedance: 6.0 Ohms  
Connectors: (2) 4 Contact 10 AWG Phoenix/  
EuroBlock Style Screw Terminal,  
Gland Nut with Input Panel Cover  
Included for Weatherizing  
Enclosure Material: 13 Ply Weather Resistant Birch,  
Fiberglass Finish  
Grille: 18 GA Stainless Steel with Hydro-  
phobic Cloth and Rotatable Logo  
Suspension: (22) M10 Threaded Points  
Dimensions (H x W x D): 30.26” x 18.50” x 18.37”  
(
768.6mm x 469.8mm x 466.6mm)  
Net Weight: 70.9 lb (32.1 kg)  
Shipping Weight: 81.2 lb (36.8 kg)  
1 Half Space Measurement.  

In addition to the user manual EV Rider EVF-1152S/94-FG, we also provide a support panel to help you solve your problems with EV Rider EVF-1152S/94-FG. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with EV Rider EVF-1152S/94-FG. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with EV Rider EVF-1152S/94-FG - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.