User manual JBL L226C

If you found this page, you probably have a problem and you need a user manual for the device JBL L226C. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database JBL L226C it belongs to the category Speaker. A user manualJBL L226C is taken from the manufacturer, a JBL company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device JBL L226C directly. You can view the user manualJBL L226C directly online or save and store it on your computer.

Studio L, O.M. 9/26/06 10:52 AM Page 4  
EXISTING CONSTRUCTION  
L226C, L228C, LS326C, LS328C  
1/2"  
1/2"  
1/2"  
1
. Remove the plastic paint  
2. Determine the correct  
speaker location.  
NOTE: Use the included  
template when cutting the  
drywall.  
3. NOTE: Always allow at  
least a 1/2 inch between a  
wall stud and the speaker  
cutout or the locking tabs  
will not be able to swivel  
into place.  
4. Ensure that the drywall or plywood  
board or other appropriate wallboard  
is at least 1/2-inch thick and confirm  
that the board material is capable of  
withstanding the weight of the speaker  
you will be installing. Cut the drywall.  
shield from the speaker frame.  
5
. Connect the speaker  
6. Make sure all four locking tabs  
are properly positioned against  
the locking tab stops that are  
located on the speaker frame (see  
Figure 5 below). After confirming  
this, carefully place the frame  
assembly in the wall and confirm  
that there is no more than 1/8-inch  
play between the frame and the  
wall cutout. After positioning the  
speaker in the mounting location,  
back each screw out one full turn  
7. Screw down each of the four  
Phillips-head screws, alternating  
between the four screws. The  
locking tabs will swivel into place  
and secure the unit to the rear  
surface of the wall panel. Hand-  
tighten with a nonpowered,  
straight-handle regular screw-  
driver only. Do not use a socket  
wrench, a powered screwdriver,  
a drill or any other powered tool.  
Confirm that the speaker is firmly  
and securely held in place and  
that all four locking tabs are firmly  
resting against the wall panel.  
8. Attach the metal grille  
and logo, if desired.  
wires to the speaker.  
(
turn counterclockwise).  
Figure 5.  
4

In addition to the user manual JBL L226C, we also provide a support panel to help you solve your problems with JBL L226C. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with JBL L226C. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with JBL L226C - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.