User manual Onkyo SKS-HT240

If you found this page, you probably have a problem and you need a user manual for the device Onkyo SKS-HT240. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Onkyo SKS-HT240 it belongs to the category Speaker. A user manualOnkyo SKS-HT240 is taken from the manufacturer, a Onkyo company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Onkyo SKS-HT240 directly. You can view the user manualOnkyo SKS-HT240 directly online or save and store it on your computer.

HTP-240.fm Page7 Thursday,April7,2005 4:36 PM  
Various Mounting Methods—Continued  
Mounting horizontally  
Using Speaker Mounts/Brackets  
To mount the center speaker horizontally, use the two  
keyhole slots shown below to hang it on two screws that  
are securely screwed into the wall.  
Threaded inserts for M5 machine screws (1/4-inch  
screws for North American model) are provided on the  
rear of each speaker for wall-mounting with commer-  
cially available speaker mounts and brackets. Refer to  
the manual supplied with your mounts or brackets for  
installation details.  
Center speaker  
Keyhole slots for horizontal  
wall mounting  
Spacers  
Spacers  
2
-9/16"  
Use this hole if mounting  
vertically  
(
65 mm)  
2
-9/16"  
(
65 mm)  
4
-7/8" (125 mm)  
7-9/16" (190 mm)  
4-7/8" (125 mm)  
Use this hole if mounting  
horizontally  
Caution:  
A mounting screw’s ability to support a speaker depends  
on how well it’s anchored to the wall. If you have hollow  
walls, screw each mounting screw into a stud. If there are  
no studs, or the walls are solid, use suitable wall anchors.  
Use screws with a head diameter of 3/8 inch (9.5 mm) or  
less and a shank diameter of 1/8 inch (or 4 mm) or less  
Note:  
The portion of the screw that goes into the speaker’s  
threaded insert should be between 1/5" and 3/8" of an  
inch long (5 mm and 9 mm).  
(
No. 8 or smaller). With hollow walls, use a cable/pipe  
detector to check for any power cables or water pipes  
before making any holes.  
Leave a gap of between 9/32"(7 mm) and 13/32"  
Mount or bracket  
(
10 mm) between the wall and the base of the screw  
head, as shown.  
1
5
/4" (North American)  
mm (Others)  
Wall  
1
/5"–3/8"  
(
5 – 9 mm)  
9
(
/32"–13/32"  
7 – 10 mm)  
(
We recommend that you consult a home installation  
professional.)  
7

In addition to the user manual Onkyo SKS-HT240, we also provide a support panel to help you solve your problems with Onkyo SKS-HT240. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Onkyo SKS-HT240. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Onkyo SKS-HT240 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.