User manual Phase Technology IW500B

If you found this page, you probably have a problem and you need a user manual for the device Phase Technology IW500B. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Phase Technology IW500B it belongs to the category Speaker. A user manualPhase Technology IW500B is taken from the manufacturer, a Phase Technology company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Phase Technology IW500B directly. You can view the user manualPhase Technology IW500B directly online or save and store it on your computer.

In-Wall Speaker  
IW500b Technical Information for System Engineers  
Key Features  
BroadBeam® waveguide technology deliv-  
ers a consistent dispersion pattern up to  
10 kHz for maximum coverage area per  
speaker (EASE™ documented).  
One 133 mm (5.25 in) polypropylene  
woofer and one 25 mm (1 in) convex alu-  
minum tweeter with FerroFluid cooling  
mounted to an M5 Motorboard.  
106.5 dB Max. SPL offers high output capa-  
Specifications: IW500b  
bilities and reduced amplification costs.  
System Type  
5.25" Coax, in wall, sealed (32 Watt transformer for  
5/70.7/100 Volt or 8 Ohm direct)  
8 ohm  
87.5 dB  
87.5 dB  
140 Hz - 22 kHz  
69 Hz - 22 kHz  
106.5 dB  
• Rapid installation blind-mount system for  
quick and secure installation.  
Impedance (nominal) 1  
Sensitivity dB @ 2.83V/1M  
Sensitivity dB @ 1W/1M  
Easy-access 6-position tap switch for 25,  
70.7 & 100 Volt applications with voice  
coil/8 Ohm direct simplifies ordering &  
inventory tracking.  
Frequency Response (- 3 dB) 3  
Frequency Response (-10 dB) 3  
Max. Program Power 4  
• Integrated UL-listed steel enclosure with  
conduit connections.  
Max. Continuous Power RMS 5  
Max. Power SPL @ 1 M 6  
Included accessories: Mounting hardware,  
paint mask, hole template and conduit  
Coverage Angle (-6 dB @ 2 kHz)  
Coverage Angle (-6 dB @ 10 kHz) 70º horizontal / 85º vertical  
Coverage Angle (Avg. from 2 to 10 kHz) 115º horizontal / 115º vertical  
90º horizontal / 100º vertical  
Directivity Factor (Q)  
Directivity Index (DI) dB  
Tap Selector  
Transducer - Low Frequency Driver 1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround  
Transducer - High Frequency Driver 25mm (1in) Convex aluminum tweeter with waveguide  
4.9 (Avg. 100 Hz - 10 kHz) / 8.3 ( 2 kHz)  
6.0dB (Avg. 100 Hz - 10kHz) /9.2dB (2 kHz)  
6-Position rotary switch with 8 ohm direct  
• Optional accessory: Pre-construction  
bracket (AC-IW5-PCB).  
High-quality white paint finish. Custom  
paint colors optional.  
Low Frequency Voice Coil  
Crossover Frequency  
Network Type: Low Pass  
Network Type: High Pass  
25.4 mm / 1.00 in  
3.0 kHz  
12 dB per octave, 2nd order  
12 dB per octave, 2nd order  
Cast aluminum  
Iridite-plated steel with powder-coat finish  
Wire leads  
White (only), Paintable  
11.84 in / 300.7 mm  
8.64 in / 219.5 mm  
3.90 in / 99.1 mm  
The IW500b is a 5.25” coax in-wall loud-  
speaker that delivers effective low-end  
response (69 Hz, -10 dB) and optimal off-  
axis performance (up to 10 kHz, EASE™  
documented). SoundTube’s proprietary  
BroadBeam® waveguide tweeter system  
delivers consistent high-performance  
audio across the operating bandwidth.  
The IW500b speaker design incorporates  
a low-profile grille and 6-position tap  
switch with an 8 Ohm bypass. Mounting  
hardware is included and features a fast  
and secure optimally engineered constant-  
tension mounting system and an inte-  
grated backcan for maximum efficiency  
and applications where UL approval is  
required. A pre-construction bracket is  
offered as an optional accessory.  
Shipping Weight  
Included Accessories  
8.9 lb / 4.0 kg  
11.0 lb / 5.0 kg  
1 UL listed 1/2" conduit connector, 2 wire nuts, paint  
mask, hole template  
Preconstruction bracket (AC-IW-PCB)  
1 per box  
Backcan listed to UL1480  
Optional Accessories  
Regulatory - UL  
Regulatory - CE  
Impedance listed per IEC 60268-5 with  
a minimum less than 80% the nominal  
70.7 V Output  
100 V Output  
25 V Output  
5 w 94.5 dB  
1w1m sensitivity determined using  
nominal impedance  
33 w 102.5 dB 33 w 102.5 dB  
3 Frequency response measured in half  
or full space as dictated by speaker  
mounting configuration  
17 w  
100.0 dB 17 w 100.0 dB 2.5 w 91.5 dB  
97.0 dB 9 w 97.0 dB 1.3 w 88.5 dB  
95.5 dB 6 w 95.5 dB 0.63 w 85.5 dB  
92.5 dB  
Max program power is 3 dB above max  
continuous power  
3 w  
Designed for in-wall applications, the  
IW500b is ideal for music and messaging  
in boardroom, church, corporate A/V and  
education applications. For additional  
bass response down to 41 Hz (-10 dB), the  
CM1001d subwoofer may be used.  
Continuous power rating, EIA-426-B test  
Max output based on max continuous power  
Max useable SPL based on testing  
by NWAA Labs  
2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08  

In addition to the user manual Phase Technology IW500B, we also provide a support panel to help you solve your problems with Phase Technology IW500B. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Phase Technology IW500B. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Phase Technology IW500B - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.