User manual QSC Audio I-YM8

If you found this page, you probably have a problem and you need a user manual for the device QSC Audio I-YM8. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database QSC Audio I-YM8 it belongs to the category Speaker. A user manualQSC Audio I-YM8 is taken from the manufacturer, a QSC Audio company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device QSC Audio I-YM8 directly. You can view the user manualQSC Audio I-YM8 directly online or save and store it on your computer.

Mounting  
Stand Alone Mounting  
If using the loudspeaker only, it can be set on any  
appropriate surface. The cabinet will lean back at a  
slight angle when set on a flat surface. Install the  
four self-adhesive rubber feet on the cabinet bottom  
to stabilize the loudspeaker and to help prevent it  
from moving due to cabinet vibration at high output  
levels.  
Ensure the mounting  
surface and support-  
ing structure are  
appropriately strong enough to  
support the loudspeaker  
assembly and any potential  
vibration or seismic activity.  
On the back of the loudspeaker, near the bottom, is  
a safety cable attachment point. Install a safety  
cable strong enough to support several times the  
weight of the loudspeaker assembly in the event it  
may fall. The cable must be secured to a secondary  
support point which is also strong enough to sup-  
port several times the loudspeaker’s weight.  
Attach a safety cable to the  
attachment point on the bot-  
tom-back of the loudspeaker.  
Ensure the safety cable, cable  
attachment technique, secur-  
ing hardware, and attachment  
points are strong enough to  
support several times the  
weight of the loudspeaker in  
the event of a primary-mount  
failure.  
EN  
IMPORTANT! ENSURE THAT THE  
LOUDSPEAKER IS MOUNTED PROP-  
ERLY AND A SAFETY CABLE IS  
INSTALLED TO RETAIN THE LOUD-  
SPEAKER IN THE EVENT OF A MOUNT-  
ING FAILURE.  
Pole Cup  
The included pole cup will fit 1.375” and 1.500” (35  
and 38 mm) diameter poles. To use the pole cup,  
thread the adapter into the insert on the bottom of  
the loudspeaker. Ensure the adapter is secure  
before mounting on pole. Set the pole cup onto the  
pole and make sure the pole seats fully into the  
adapter. 1.500” (38 mm) poles will seat about 2” (50  
mm) deep in the adapter, and 1.375” (35 mm) poles  
will seat about 4” (100 mm) deep in the adapter.  
Make sure the set screw retaining knob is in the  
correct hole for the pole size used and that it is  
tightened.  
5
/8”-27 Mic Stand Adapter  
The mic stand adapter is intended for use with  
large-base tripod microphone stands.  
5

In addition to the user manual QSC Audio I-YM8, we also provide a support panel to help you solve your problems with QSC Audio I-YM8. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with QSC Audio I-YM8. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with QSC Audio I-YM8 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.