User manual QSC Audio I-YM8

If you found this page, you probably have a problem and you need a user manual for the device QSC Audio I-YM8. Be sure to check that it is the user manual to exactly the device that you are looking for. In our database QSC Audio I-YM8 it belongs to the category Speaker. A user manualQSC Audio I-YM8 is taken from the manufacturer, a QSC Audio company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device QSC Audio I-YM8 directly. You can view the user manualQSC Audio I-YM8 directly online or save and store it on your computer.

Specifications  
1
Frequency Response :  
80- 21k Hz (-6 dB)  
60- 22k Hz (-10 dB)  
2
Maximum Output :  
113 dB SPL continuous rms output  
119 dB SPL peak output  
(
calculated)  
Impedance:  
8 ohms nominal  
7
1
.0 ohms minimum, 210 Hz  
35 ohms maximum  
3
Power Rating :  
rms (IEC 100 hrs):  
recommended amp power:  
200 watts rms  
400 watts rms  
EN  
Sensitivity:  
90.5 dB, 1 watt, 1 meter, free field (4 pi)  
Directivity Index:  
500 Hz  
4.0  
5.5  
11.7  
8.9  
8.6  
7.2  
1
2
4
8
1
000 Hz  
000 Hz  
000 Hz  
000 Hz  
6000 Hz  
Q:  
500 Hz  
2.5  
3.6  
14.7  
7.7  
7.3  
5.3  
1
2
4
8
1
000 Hz  
000 Hz  
000 Hz  
000 Hz  
6000 Hz  
Weight:  
I-82H: 17.5 lb. net, 20.5 lb. shipping  
I-YM8: 2.8 lb. net, 5.0 lb. shipping  
Nominal Coverage:  
Enclosure and Grill:  
Connectors:  
90° horiz. x 60° vert., waveguide can be rotated 90°  
high impact polystyrene, removable metal grill, logo badge can be rotated  
two (2) Neutrik Speakon NL4FC connectors wired in parallel, +signal: pin 1+, - signal: pin 1-  
Mounting Hardware:  
Included: Pole cup (attaches to loudspeaker bottom or optional yoke mount,  
fits 1.375” or 1.500” (35 mm or 38 mm) diameter poles) and 5/8”-27 mic stand adapter.  
Optional: Yoke mount with retaining knobs, two swivel feet for using yoke mount as stage  
monitor, pole cup (attaches to loudspeaker bottom or optional yoke mount, fits 1.375” or 1.500”  
(
35 mm or 38 mm) diameter poles) and 5/8”-27 mic stand adapter, and retaining knob for pole cup.  
NOTES:  
1
2
3
- All frequency ranges specified refer to measured free-field response (4 pi).  
- Calculated maximum peak SPL at 1 m, free-field, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.  
- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.  
Specifications are subject to change without notice.  
8

In addition to the user manual QSC Audio I-YM8, we also provide a support panel to help you solve your problems with QSC Audio I-YM8. If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with QSC Audio I-YM8. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with QSC Audio I-YM8 - you will surely help many users by doing so.

Have you got problems with your device? Ask a question - our users can help you

No one has added a comment for this device/ user manual.